Journals and Proceedings ? Brought to you by The Optical Society

Direct laser writing of three-dimensional photonic crystal lattices within a PbS quantum-dot-doped polymer material

Michael J. Ventura, Craig Bullen, and Min Gu

Optics Express, Vol. 15, Issue 4, pp. 1817-1822        doi:10.1364/OE.15.001817

» View Full Text: Acrobat PDF (861 KB) Open Access

  • OCIS Codes:
  • (160.5470) Materials : Polymers
  • (220.4000) Optical design and fabrication : Microstructure fabrication
ToC Category:
Photonic Crystals

Citation
Michael J. Ventura, Craig Bullen, and Min Gu, "Direct laser writing of three-dimensional photonic crystal lattices within a PbS quantum-dot-doped polymer material," Opt. Express 15, 1817-1822 (2007)
http://www.opticsinfobase.org/abstract.cfm?URI=oe-15-4-1817

Click for help

Abstract

We report on the synthesis of an optically homogenous PbS quantum-dot-doped polymer material of thickness up to 100 micrometers. It is shown that high quality micro-void channels of submicrometer diameters can be directly fabricated into this nanocomposite by using an ultrafast femtosecond laser beam. Periodically stacked channels in the form of a three-dimensional photonic crystal woodpile lattices reveals a main stop gaps as well as higher-order gaps that overlaps the near-infrared emission wavelength range of PbS quantum dots. These partial stop gaps are well defined in an angular range from zero to 15 degrees in the stacking direction.

© 2007 Optical Society of America

» View Full Text: Acrobat PDF (861 KB) Open Access

History
Original Manuscript: December 4, 2006
Manuscript Accepted: February 8, 2007
Revised Manuscript: January 31, 2007
Published: February 19, 2007

References

  1. H. Misawa and S. Juodkazis, eds., 3D laser microfabrication, Principles and applications (Wiley-Vch Verlag, Weinheim, 2006).
  2. D. Day and M. Gu, "Formation of voids in a doped polymethylmethacrylate polymer," Appl. Phys Lett. 80, 2404-2406 (2002). [CrossRef]
  3. M. J. Ventura, M. Straub, and M. Gu, "Void channel microstructures in resin solids as an efficient way to infrared photonic crystals," Appl. Phys Lett. 82, 1649-1651 (2003). [CrossRef]
  4. M. Straub, M. Ventura, and M. Gu, "Multiple higher-order stop gaps in infrared polymer photonic crystals," Phys. Rev. Lett. 91, 043901 (2003). [CrossRef]
  5. E. G. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, and B. Luther-Davies, "Laser-matter interaction in the bulk of a transparent solid: Confined microexplosion and void formation," Phys. Rev. B 73, 214101 (2006). [CrossRef]
  6. S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. G. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. T. Tikhonchuk, "Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multimegabar pressures," Phys. Rev. Lett. 96, 166101 (2006). [CrossRef]
  7. E. N. Glezer, M. Milosavljevic, L. Huang, R. J. Finlay, T. H. Her, J. P. Callan, and E. Mazur, "Three-dimensional optical storage inside transparent materials," Opt. Lett. 21, 2023-2025 (1996).
  8. G. Zhou, and M. Gu, "Anisotropic properties of ultrafast laser-driven microexplosions in lithium niobate crystal," Appl. Phys. Lett. 87, 1-3 (2005).
  9. K. Yamasaki, S. Juodkazis, M. Watanabe, H. B. Sun, S. Matsuo, and H. Misawa, "Recording by microexplosion and two-photon reading of three-dimensional optical memory in polymethylmethacrylate films," Appl. Phys. Lett. 76, 1000-1002 (2000). [CrossRef]
  10. K. Wundke, J. Auxier, A. Schülzgen, N. Peyghambarian, and N. F. Borrelli, "Room-temperature gain at 1.3 µm in PbS-doped glasses," Appl. Phys. Lett. 75, 3060-3062 (1999). [CrossRef]
  11. V. Sukhovatkin, S. Musikhin, I. Gorelikov, S. Cauchi, L. Bakueva, E. Kumacheva, and E. H. Sargent, "Room-temperature amplified spontaneous emission at 1300 nm in solution-processed PbS quantum-dot films," Opt. Lett. 30, 171-173 (2005). [CrossRef]
  12. L. Bakueva, S. Musikhin, M. A. Hines, T. W. F. Chang, M. Tzolov, G. D. Scholes, and E. H. Sargent, "Size-tunable infrared (1000-1600 nm) electroluminescence from PbS quantum-dot nanocrystals in a semiconducting polymer," Appl. Phys. Lett. 82, 2895-2897 (2003). [CrossRef]
  13. S. Hoogland, V. Sukhovatkin, I. Howard, S. Cauchi, L. Levina, and E. H. Sargent, "A solution-processed 1.53 µm quantum dot laser with temperature-invariant emission wavelength," Opt. Express 14, 3273-3281 (2006). [CrossRef]
  14. S. A. McDonald, G. Konstantatos, S. G. Zhang, P. W. Cyr, E. J. D. Klem, L. Levina, and E. H. Sargent, "Solution-processed PbS quantum dot infrared photodetectors and photovoltaics," Nat. Mater 4, 138-142 (2005). [CrossRef]
  15. L. Pang, Y. M. Shen, K. Tetz, and Y. Fainman, "PMMA quantum dots composites fabricated via use of pre-polymerization," Opt. Express 13, 44-49 (2005). [CrossRef]
  16. M. A. Hines, and G. D. Scholes, "Colloidal PbS nanocrystals with size-tunable near-infrared emission: Observation of post-synthesis self-narrowing of the particle size distribution," Adv. Mater. 15, 1844-1849 (2003). [CrossRef]
  17. L. Bakueva, I. Gorelikov, S. Musikhin, X. S. Zhao, E. H. Sargent, and E. Kumacheva, "PbS quantum dots with stable efficient luminescence in the near-IR spectral range," Adv. Mater. 16, 926-929 (2004). [CrossRef]
  18. D. Day, and M. Gu, "Effects of refractive-index mismatch on three-dimensional optical data-storage density in a two-photon bleaching polymer," Appl. Opt. 37, 6299-6304 (1998).
  19. J. Li, B. Jia, G. Zhou, and M. Gu, "Fabrication of three-dimensional woodpile photonic crystals in a PbSe quantum dot composite material," Opt. Express 14, 10740-10745 (2006). [CrossRef]

Citing Articles

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click for help

 

OSA is a member of CrossRef.








Browse by Journal and Year


   


Lookup Conference Papers