Abstract

This paper describes conditions for the reproducible measurement of optical fiber connection losses. The steady-state power distribution is characterized by the width of the far-field pattern (FFP). A method is proposed to determine the power distribution in the fiber from the measured FFP. Using this method, connection losses of graded-index fibers are calculated for various widths of the FFP. Calculated results are verified experimentally. The width of the FFP must be controlled to within an accuracy of 3% for a 0.05-dB reproducibility of the connection loss. Connection loss dependence on mismatch of fiber parameters is also calculated. Calculation shows that variations in core radius, numerical aperture, and index gradient have to be controlled to within 3%, 6%, and 0.3, respectively, for the same reproducibility.

© 1981 Optical Society of America

Loss in multimode fiber connections with a gape

W. van Etten, W. Lambo, and P. Simons
Appl. Opt. 24(7) 970-976 (1985)

Nondestructive measurement of core radius, numerical aperture, and cutoff wavelength for single-mode fibers

S. Masuda, T. Iwama, and Y. Daido
Appl. Opt. 20(23) 4035-4038 (1981)

Pulse distortion in optical fibers with transverse offset splices

L. Bjerkan and H. Nordby
Appl. Opt. 20(3) 435-439 (1981)

Interlaboratory measurement comparison to determine the radiation angle (N.A.) of graded-index optical fibers

Douglas L. Franzen and Ernest M. Kim
Appl. Opt. 20(7) 1218-1220 (1981)

Mode coupling effects in a graded-index fiber cable

Masaharu Ohashi, Ken-ichi Kitayama, and Shigeyuki Seikai
Appl. Opt. 20(14) 2433-2438 (1981)