Abstract

A method of sensing vibration using the detection of changes in the spatial distribution of energy in the output of a multimode optical fiber has been demonstrated. Two implementations of the sensor have been built and tested. The first implementation involved simple optical processing of the output fiber speckle pattern using spatial filtering. The second implementation involved projecting the pattern on a CCD array and digitally processing observed changes in the intensity distribution. A mathematical model has been developed which has shown good agreement with observed sensor behavior. The sensor technique has been used to detect induced structural vibration in laboratory test specimens. Simple field testing has also demonstrated the ability of the technique to detect personnel and vehicles passing over a buried and electrically undetectable sensing cable. The sensing technique is compatible with off-the-shelf components and fiber cable and even allows for simultaneous telecommunication and sensing using the same optical fiber cable. Near term application of this technology could provide significant benefits for vibration sensing, intrusion detection, and acoustic sensing.

© 1989 Optical Society of America

Ultra-long-distance (>160 km) distributed optic fiber vibration sensing system without an in-line repeater

Zi Ye, Churui Li, and Chao Wang
Appl. Opt. 58(13) 3426-3431 (2019)

Fiber optic vibration sensor for remote monitoring in high power electric machines

Giuliano Conforti, Massimo Brenci, Andrea Mencaglia, and Anna Grazia Mignani
Appl. Opt. 28(23) 5158-5161 (1989)

Sensitive acoustic vibration sensor using single-mode fiber tapers

Yi Li, Xiaozhen Wang, and Xiaoyi Bao
Appl. Opt. 50(13) 1873-1878 (2011)

Impact and vibration detection in composite materials by using intermodal interference in multimode optical fibers

Abdelrafik Malki, Rachid Gafsi, Laurent Michel, Michel Labarrère, and Pierre Lecoy
Appl. Opt. 35(25) 5198-5201 (1996)

Multi-longitudinal mode laser beat-frequency optical fiber vibration sensing system based on an FM radio module

Xu Wang, Shanjin Wang, Ziqiang Zhou, and Fang Wang
Appl. Opt. 62(25) 6672-6679 (2023)