Abstract

Surface plasmons generated at a silver–polyimide interface and the guided modes coupled into planar films cause dips in the reflectivity curve of a transparent dielectric–silver–polyimide–air structure. These minima in the reflectivity curve were used to measure the polyimide thickness as well as the real and imaginary parts of the polymer refractive index (extinction). Precision within 1% of the polymer coat thickness was achieved through the use of this technique over the range 0.5−10 μm. In some cases, this technique is capable of yielding a precision of ∼10% on the imaginary part of the polymer refractive index and provides a useful method for determining the performance of a low-loss polymer waveguide. Techniques in fitting the experimental reflectivity data to obtain the optical constants are also described.

© 1994 Optical Society of America

Determination of the refractive index and thickness of holographic silver halide materials by use of polarized reflectances

Augusto Beléndez, Tarsicio Beléndez, Cristian Neipp, and Inmaculada Pascual
Appl. Opt. 41(32) 6802-6808 (2002)

Simultaneous determination of the optical constants and thickness of very thin films by using soft-x-ray reflectance measurements

Jianlin Cao, Mihiro Yanagihara, Masaki Yamamoto, Yoshinori Goto, and Takeshi Namioka
Appl. Opt. 33(10) 2013-2017 (1994)

Measurement of the complex refractive index of liquids in the infrared using spectroscopic attenuated total reflection ellipsometry: correction for depolarization by scattering

J. H. W. G. den Boer, G. M. W. Kroesen, and F. J. de Hoog
Appl. Opt. 34(25) 5708-5714 (1995)

Photogeneration of refractive-index patterns in doped polyimide films

K. K. Chakravorty
Appl. Opt. 32(13) 2331-2338 (1993)

Detection of defects in multiple-layer structures by using surface plasmon resonance

L. Lévesque and B. E. Paton
Appl. Opt. 36(28) 7199-7203 (1997)