Abstract

We analyze the temperature distribution in several $\text{Yb}:\text{YAG}$ longitudinally pumped amplifier crystals by using various cooling configurations. The crystal designs are (i) a composite crystal made of a thin sheet of high-doped $\text{Yb}:\text{YAG}$ bonded on a bulk piece of undoped YAG and (ii) a thick piece of low-doped $\text{Yb}:\text{YAG}$ crystal. The cooling configurations investigated here include those both from the rear face or from the rear and side faces together. In every case we determine the average temperature rise, the longitudinal and radial temperature gradient, and the resulting crystal bending and optical phase distortion. We optimize the best cooling configuration and crystal design by compromising the average temperature, thermodeformation, and optical phase distortion. The experimental results also indicate that a thin sheet of gain medium ($1.6\text{\hspace{0.17em} mm}$ thick at 10 at. % doping) suffers from a notable bending deformation, which results in an unexpected decrease of the output energy.

© 2006 Optical Society of America

Thickness optimization of the composite gain medium for the oscillator and amplifier of the Lucia laser

Haiwu Yu and Gilbert Bourdet
Appl. Opt. 44(33) 7161-7169 (2005)

Comprehensive modeling of the temperature-related laser performances of the amplifiers of the LUCIA laser

Haiwu Yu, Gilbert Bourdet, and Serge Ferre
Appl. Opt. 44(30) 6412-6418 (2005)

Longitudinal temperature distribution in an end-pumped solid-state amplifier medium: application to a high average power diode pumped Yb:YAG thin disk amplifier

Gilbert L. Bourdet and Haiwu Yu
Appl. Opt. 46(23) 6033-6041 (2007)

Generalized formula for continuous-wave end-pumped Yb-doped material amplifier gain and laser output power in various pumping configurations

Gilbert L. Bourdet and Eric Bartnicki
Appl. Opt. 45(36) 9203-9209 (2006)

Large size crystalline vs. co-sintered ceramic Yb³⁺:YAG disk performance in diode pumped amplifiers

Daniel Albach and Jean-Christophe Chanteloup
Opt. Express 23(1) 570-579 (2015)