Abstract
This paper proposes a combined method for two-dimensional temperature and velocity measurements in liquid and gas flow using a schlieren system. Temperature measurements are made by relating the intensity level of each pixel in a schlieren image to the corresponding knife-edge position measured at the exit focal plane of the schlieren system. The same schlieren images were also used to measure the velocity of the fluid flow. The measurement is made by using particle image velocimetry (PIV). The PIV software used in this work analyzes motion between consecutive schlieren frames to obtain velocity fields. The proposed technique was applied to measure the temperature and velocity fields in the natural convection of water provoked by a heated rectangular plate.
©2012 Optical Society of America
Full Article | PDF ArticleMore Like This
A. Martínez-González, D. Moreno-Hernández, and J. A. Guerrero-Viramontes
Appl. Opt. 52(22) 5562-5569 (2013)
A. Martínez-González, D. Moreno-Hernández, M. León-Rodríguez, and C. Carrillo-Delgado
Appl. Opt. 55(3) 556-564 (2016)
Emishaw D. Iffa, A. Rashid A. Aziz, and Aamir S. Malik
Appl. Opt. 50(5) 618-625 (2011)