Abstract

Line edge roughness (LER) has been identified as a potential source of uncertainty in optical scatterometry measurements. Characterizing the effect of LER on optical scatterometry signals is required to assess the uncertainty of the measurement. However, rigorous approaches to modeling the structures that are needed to simulate LER can be computationally expensive. In this work, we compare the effect of LER on scatterometry signals computed using an effective medium approximation (EMA) to those computed with realizations of rough interfaces. We find that for correlation lengths much less than the wavelength but greater than the rms roughness, an anisotropic EMA provides a satisfactory approximation in the cases studied.

© 2010 Optical Society of America

Extracting optical constants of solid materials with micro-rough surfaces from ellipsometry without using effective medium approximation

Yuanbin Liu, Jun Qiu, Linhua Liu, and Bingyang Cao
Opt. Express 27(13) 17667-17680 (2019)

Modeling of line roughness and its impact on the diffraction intensities and the reconstructed critical dimensions in scatterometry

H. Gross, M.-A. Henn, S. Heidenreich, A. Rathsfeld, and M. Bär
Appl. Opt. 51(30) 7384-7394 (2012)

Fitting-determined formulation of effective medium approximation for 3D trench structures in model-based infrared reflectrometry

Chuanwei Zhang, Shiyuan Liu, Tielin Shi, and Zirong Tang
J. Opt. Soc. Am. A 28(2) 263-271 (2011)

Effect of line roughness on the diffraction intensities in angular resolved scatterometry

Akiko Kato and Frank Scholze
Appl. Opt. 49(31) 6102-6110 (2010)

Applicability of the effective medium approximation in the ellipsometry of randomly micro-rough solid surfaces

Yuanbin Liu, Jun Qiu, and Linhua Liu
Opt. Express 26(13) 16560-16571 (2018)