Abstract

An external cavity has been developed for use with commercial diode lasers. It uses a diffraction grating at grazing incidence for wavelength selection and output coupling. This configuration allows a GaAlAs diode laser to be tuned conveniently anywhere in a range greater than 20 nm. Also, the linewidth is reduced by a factor of more than 1000 from 40 MHz to less than 10 kHz. The new laser system should be useful for high-resolution spectroscopy, laser cooling of atoms, time standards, and coherent optical communications.

© 1991 Optical Society of America

Continuously tunable external-cavity diode laser with a double-grating arrangement

D. Wandt, M. Laschek, A. Tünnermann, and H. Welling
Opt. Lett. 22(6) 390-392 (1997)

Electronically tunable single-mode external-cavity diode laser

John R. Andrews
Opt. Lett. 16(10) 732-734 (1991)

Tunable external-cavity diode laser at 650 nm based on a transmission diffraction grating

Toni Laurila, Timo Joutsenoja, Rolf Hernberg, and Markku Kuittinen
Appl. Opt. 41(27) 5632-5637 (2002)

Influence of grating parameters on the linewidths of external-cavity diode lasers

Huanqian Loh, Yu-Ju Lin, Igor Teper, Marko Cetina, Jonathan Simon, James K. Thompson, and Vladan Vuletić
Appl. Opt. 45(36) 9191-9197 (2006)

External-cavity diode laser in second-order Littrow configuration

M. Britzger, A. Khalaidovski, B. Hemb, E.-B. Kley, F. Brückner, R.-H. Rinkleff, K. Danzmann, and R. Schnabel
Opt. Lett. 37(15) 3117-3119 (2012)