Abstract

A novel adaptive wave-front correction system based on an all-optical feedback interferometer is described. In this system the two-dimensional output fringe intensity from a Mach–Zehnder interferometer with large radial shear is optically fed back to an optically addressed phase-only liquid-crystal spatial light modulator. Consequently, without a separate aberration-free reference wave, the modulator phase approximates the conjugate of the interferometer phase that is directly related to the phase of the input aberrated wave front, so this system is applicable in adaptive optics. We successfully achieved real-time correction of aberrated wave fronts: A diffraction pattern that was seriously distorted because of aberrations was transformed into a diffraction-limited spot immediately after the feedback loop was closed.

© 2000 Optical Society of America

Surface-profile measurement by means of a polarization Sagnac interferometer with parallel optical feedback

T. Shirai, T. H. Barnes, and T. G. Haskel
Opt. Lett. 24(5) 297-299 (1999)

Closed-loop aberration correction by use of a modal Zernike wave-front sensor

M. A. A. Neil, M. J. Booth, and T. Wilson
Opt. Lett. 25(15) 1083-1085 (2000)

Liquid-crystal adaptive optics based on feedback interferometry for high-resolution retinal imaging

Tomohiro Shirai
Appl. Opt. 41(19) 4013-4023 (2002)

Open- and closed-loop aberration correction by use of a quadrature interferometric wave-front sensor

Kevin L. Baker, Eddy A. Stappaerts, Scott C. Wilks, Peter E. Young, Donald T. Gavel, Jack W. Tucker, Dennis A. Silva, and Scot S. Olivier
Opt. Lett. 29(1) 47-49 (2004)

Adaptive-optics correction of a stellar interferometer with a single pyramid wave-front sensor

C. Verinaud and S. Esposito
Opt. Lett. 27(7) 470-472 (2002)