Abstract

We have developed a custom scanning laser ophthalmoscope that uses phase plates produced by photolithography to improve the contrast of human retinal images. We combined the scanning engine from a commercial real-time confocal microscope with custom optics to provide medium magnification imaging of the human retina (3° field of view). Defocus and astigmatism were corrected with conventional trial lenses. Higher-order aberrations of the eye were corrected with a phase plate. A 633-nm laser was used for illuminating the retina. Inserting the phase plate into the optical system increased the contrast of a sample retinal vessel by 26%. Additionally, a number of small features of the retina, which were not visible with standard commercial imaging systems, became visible. There results illustrate that, with the rapid development of custom fabrication techniques for refractive corrections, improved diagnostic imaging with little added complexity to existing ophthalmic imaging systems may be realistic.

© 2002 Optical Society of America

Confocal scanning laser ophthalmoscopy improvement by use of Mueller-matrix polarimetry

Juan M. Bueno and Melanie C. W. Campbell
Opt. Lett. 27(10) 830-832 (2002)

Adaptive optics scanning laser ophthalmoscopy

Austin Roorda, Fernando Romero-Borja, William J. Donnelly III, Hope Queener, Thomas J. Hebert, and Melanie C.W. Campbell
Opt. Express 10(9) 405-412 (2002)

Directional imaging of the retinal cone mosaic

Brian Vohnsen, Ignacio Iglesias, and Pablo Artal
Opt. Lett. 29(9) 968-970 (2004)

High-speed, phase contrast retinal and blood flow imaging using an adaptive optics partially confocal multi-line ophthalmoscope

Soohyun Lee, Stacey S. Choi, Ratheesh K. Meleppat, Robert J. Zawadzki, and Nathan Doble
Biomed. Opt. Express 15(3) 1815-1830 (2024)

Calculated impact of higher-order monochromatic aberrations on retinal image quality in a population of human eyes

Antonio Guirao, Jason Porter, David R. Williams, and Ian G. Cox
J. Opt. Soc. Am. A 19(1) 1-9 (2002)