Abstract
Different experimental and simulation techniques aiming at a better understanding of lateral mode absorption in light-emitting diodes (LEDs) are presented in this paper. A measurement of transmitted power versus propagation distance allows us to derive the absorption losses of LED layer structures at their emission wavelength. Two models for the observed intensity distribution are presented: one is based on scattering, whereas the other relies on selective absorption. Both models were applied to InGaN-on-sapphire-based LED structures. Material absorption losses of 7 cm^-1 for the scattering model and 4 cm^-1 for the absorbing-layer model were obtained. Furthermore, these values are independent of the emission wavelength of the layer structure in the 403-433-nm range. The losses are most likely caused by a thin highly absorbing layer at the interface to the substrate. In a second step, interference of the modal field profile with the absorbing layer can be used to determine its thickness (d = 75 nm) and its absorption coefficient (alpha ~ 3900 cm^-1). This method has also been tested and applied on AlGaInP-based layer structures emitting at 650 nm. In this case, the intensity decay of alpha = 30 cm-1 includes a contribution from the absorbing substrate.
© 2004 IEEE
PDF Article
More Like This
Efficient InGaN-based yellow-light-emitting diodes
Fengyi Jiang, Jianli Zhang, Longquan Xu, Jie Ding, Guangxu Wang, Xiaoming Wu, Xiaolan Wang, Chunlan Mo, Zhijue Quan, Xing Guo, Changda Zheng, Shuan Pan, and Junlin Liu
Photon. Res. 7(2) 144-148 (2019)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription