Abstract

Temporal phase unwrapping is a method of analyzing fringe patterns in which the fringe phase Φ at each pixel is measured and unwrapped as a function of time $t.$ We propose two methods for improving the signal-to-noise ratio of the total phase change by incorporating data from the intermediate phase values. The first involves fitting the expected curve to the measured phase history; the second involves Fourier transformation of the corresponding phasors. The performance of these methods is compared both experimentally, with data from a fringe projector based on a spatial-light modulator, and numerically. It is shown that the optimum performance is given by the Fourier transform method. The best way to use the first method is with Φ decreasing exponentially with time from its maximum value to zero; this provides significant improvements in reliability, accuracy, and computation time compared with the original temporal unwrapping algorithm.

© 1997 Optical Society of America

Flexible error-reduction method for shape measurement by temporal phase unwrapping: phase averaging method

Liu Yong, Huang Dingfa, and Jiang Yong
Appl. Opt. 51(21) 4945-4953 (2012)

Robustness of reduced temporal phase unwrapping in the measurement of shape

Lars Kinell and Mikael Sjödahl
Appl. Opt. 40(14) 2297-2303 (2001)

Temporal phase unwrapping: application to surface profiling of discontinuous objects

H. O. Saldner and J. M. Huntley
Appl. Opt. 36(13) 2770-2775 (1997)

Phase measurement in temporal speckle pattern interferometry: comparison between the phase-shifting and the Fourier transform methods

Guillermo H. Kaufmann and Gustavo E. Galizzi
Appl. Opt. 41(34) 7254-7263 (2002)

Two-dimensional phase unwrapping with minimum weighted discontinuity

Thomas J. Flynn
J. Opt. Soc. Am. A 14(10) 2692-2701 (1997)