Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Injecting Light of High-Power LEDs into Thin Light Guides

Not Accessible

Your library or personal account may give you access

Abstract

A new method using a thin-film multilayer filter is described to couple light from high-power LEDs into a thin light guide such as an LCD backlight. Light emitted below the critical angle is reflected back to the LED and recycled. Large-angle emitted light passes the filter and is transported by total internal reflection in the light guide. The light guide can be as thin as 0.3mm for an LED of 1×1mm2, and the best coupling efficiency is estimated to be 82%. With this approach, a backlight system can be greatly simplified but also compact collimators can be realized. In this paper the optical design and testing of the filter is described, and a 1mm thick, 6.5mm diameter collimator is presented. Measurements on prototypes show good agreement with the designed characteristics.

© 2010 OSA, SPIE

PDF Article
More Like This
LED Polarization Conversion and Angular Shaping Module for LCD Backlighting

Po-Chun Lin, Cheng-Huan Chen, Han-Ping Yang, and Hung-Yi Lin
ITuC7 International Optical Design Conference (IODC) 2010

High power GaN-based LEDs with nano-structured Ga-doped ZnO (GZO) transparent conductive layer (TCL)

Weiqing Jia, Bingfeng Fan, Hao Jiang, Yang Liu, Baijun Zhang, Yulun Xian, Shanjing Huang, Zhiyuan Zheng, Zhisheng Wu, Keny Tong, Raymond Wong, and Gang Wang
799105 Asia Communications and Photonics Conference and Exhibition (ACP) 2010

Design and demonstration of an integrated light-guide plate for LED backlights

Enguo Chen, Jintang Lin, Zhixian Lin, and Tailiang Guo
JTu5A.31 Computational Optical Sensing and Imaging (COSI) 2014

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved