Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Performance Comparison between 980 and 1480 nm Pumping for Er3+-doped Bismuth Fiber Amplifiers

Not Accessible

Your library or personal account may give you access

Abstract

We have carried out the performance comparison between 980 and 1480-nm pumping for bismuth-based EDFAs. 980-nm pumping was observed to provide no NF benefit relative to 1480-nm due to the overall population decrease in the 4I13/2 state caused by the combination of the pump ESA and the PIQ. 1480 nm was found to be the better considering the signal gain and NF.

© 2012 Optical Society of America

PDF Article
More Like This
Paired-Induced Quenching in Bismuth Oxide-based Erbium-doped Fiber Amplifier

Minwan Jung, You Min Chang, and Ju Han Lee
C342 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2011

Experimental comparison of 980 and 1480 nm pumped erbium-doped fiber amplifiers operating under saturated conditions applicable to long-haul soliton systems

R. G. Smart, J. L. Zyskind, and D. J. DiGiovanni
CTuF5 Conference on Lasers and Electro-Optics (CLEO:S&I) 1993

Comparison of 980-and 1480-nm-pumped amplifiers in multiwavelength systems

A. J. Lucero, J. W. Sulhoff, and J. L. Zyskind
TuC2 Optical Fiber Communication Conference (OFC) 1995

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved