Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Effects of in process adjustment of process speeds on the figure and surface quality of contour ground optical surfaces

Not Accessible

Your library or personal account may give you access

Abstract

By adjusting the crossfeed speed and workpiece rotation rates as functions of position, geometrically induced variations in contour grinding can be reduced. The effects of this approach in improving process quality and consistency are described.

© 2002 Optical Society of America

PDF Article
More Like This
Effect of tool wear on tool and workpiece profiles produced in contour grinding

Yi Li, Paul D. Funkenbusch, Sheryl Gracewski, and Jeff Ruckman
OMA4 Optical Fabrication and Testing (OF&T) 2000

Computer simulation and experimental validation of errors on contour ground surfaces

J. Ruckman, E. Fess, and C. Pollicove
OMA3 Optical Fabrication and Testing (OF&T) 2000

Chatter simulation and stability predictions for contour grinding of optical glasses

Yi Li, S. M. Gracewski, P. D. Funkenbusch, and J. Ruckman
OMA5 Optical Fabrication and Testing (OF&T) 2000

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved