Abstract

It is quite possible to detect the strain of a sample based on a chirped fiber grating (CFG) sensor, which has a wider bandwidth of light signal than a fiber Bragg grating. Usually, environmental factors play negative roles in the process of intensity demodulation. A drift-eliminating method of CFG intensity demodulation has been created and tested in our lab. Three CFG sensors were involved in this research. Two of them with close wavelength bands connected in series were used as a strain sensing unit; the third one was used as a referencing grating working within the reflective wavelength spectrum of the other two. It is shown that the signal ratio of the sensing unit and the referencing grating is a linear function of the loading strain. The linearity is as high as 99.79%.

© 2014 Optical Society of America

Cantilever deflection optical fiber sensor based on a chirped fiber grating Fabry–Perot cavity

Zhanwu Xie, Haitao Yan, Hongtao Zhang, Xiaoyan Zhao, and Daofu Han
Appl. Opt. 60(27) 8384-8389 (2021)

Fiber Bragg grating strain sensor demodulation with quadrature sampling of a Mach–Zehnder interferometer

Minho Song, Shizhuo Yin, and Paul B. Ruffin
Appl. Opt. 39(7) 1106-1111 (2000)

Practical fiber-optic Bragg grating strain gauge system

Serge M. Melle, Kexing Liu, and Raymond M. Measures
Appl. Opt. 32(19) 3601-3609 (1993)

Fiber Bragg grating dynamic strain sensor using an adaptive reflective semiconductor optical amplifier source

Heming Wei, Chuanyi Tao, Yinian Zhu, and Sridhar Krishnaswamy
Appl. Opt. 55(10) 2752-2759 (2016)

Adaptive demodulation of dynamic signals from fiber Bragg gratings using two-wave mixing technology

Yi Qiao, Yi Zhou, and Sridhar Krishnaswamy
Appl. Opt. 45(21) 5132-5142 (2006)