Abstract
The measurement of flat optical components often presents difficulties because the presence of parallel surfaces generates multiple reflections that confuse conventional laser-based interferometers. These same parts have increasingly demanding surface finish tolerances as technologies improve over time, further complicating the metrology task. Here we describe an interferometric optical system for high-accuracy noncontact evaluation of the form and texture of precision flat surfaces based on an equal-optical-path geometry that uses extended, broadband illumination to reduce the influence of speckle noise, multiple reflections, and coherent artifacts by a factor of 10 when compared to laser-based systems. Combined with a low-distortion, fixed-focus imaging system and 4-Mpixel camera, the 100 mm aperture instrument offers surface height resolutions of 0.1 nm over lateral spatial frequencies extending from 0.01 to 10 cycles/mm. The instrument is vibration resistant for production-line testing of flat optics such as glass hard disks for the data-storage industry and flat-panel-display substrates.
© 2014 Optical Society of America
Full Article | PDF ArticleMore Like This
Sanjib Chatterjee, Y. Pavan Kumar, Rishipal Singh, and Sarvendra Singh
Appl. Opt. 55(2) 310-316 (2016)
Rahul Mandal, Jeremy Coupland, Richard Leach, and Daniel Mansfield
Appl. Opt. 53(8) 1554-1563 (2014)
R. Bünnagel, H.-A. Oehring, and K. Steiner
Appl. Opt. 7(2) 331-335 (1968)