Abstract
We present an all-fiber signal combiner for high power fiber lasers. Through theoretical analysis, the fabrication method is confirmed and the taper length of the fiber bundle is chosen to be 1 cm to ensure a high transmission efficiency of the combiner. Based on the theoretical results, an all-fiber signal combiner with high transmission efficiency is fabricated. A capillary with low refractive index is fused around the bundle of signal fibers to make an additional cladding layer. Then the fiber bundle is tapered to match the core of the output fiber and then spliced with the output fiber. The combiner is tested with a 500 W fiber laser and a temperature increase of 13°C/kW without any active cooling is observed in the combiner. The power transmission efficiency is measured to be close to 99% for each input port and the beam quality is around 10.
© 2015 Optical Society of America
Full Article | PDF ArticleMore Like This
Chengmin Lei, Yanran Gu, Zilun Chen, Zengfeng Wang, Pu Zhou, Yanxing Ma, Hu Xiao, Jinyong Leng, Xiaolin Wang, Jing Hou, Xiaojun Xu, Jinbao Chen, and Zejin Liu
Opt. Express 26(8) 10421-10427 (2018)
Yanran Gu, Chengmin Lei, Huan Yang, Hu Xiao, Jinyong Leng, and Zilun Chen
Appl. Opt. 58(6) 1336-1340 (2019)
Yanyan Zhou, Aibi Yang, Guanghua Yang, Qiang Qiu, Xu Zhang, Zhilun Zhang, Yinbin Xing, Jinggang Peng, HaiQing Li, Yingbo Chu, Jinyan Li, and Nengli Dai
Opt. Express 31(2) 2780-2791 (2023)