Abstract

Low phase noise microwave signals can be generated by photo-detecting the pulse train of an optical frequency comb locked to a high spectral purity continuous-wave optical reference. Amplitude-to-phase noise conversion is, however, a well-known limitation to this technique. Great care is usually required to overcome this constraint due to its strong dependence on the impinging optical power. Here we demonstrate the combined use of “magic point” operating conditions of photodetectors, pulse repetition rate multipliers, and coherent addition of microwave signals to realize a microwave extraction device largely immune to amplitude-to-phase conversion effects over a large range of impinging optical powers.

© 2014 Optical Society of America

Optical amplification and pulse interleaving for low-noise photonic microwave generation

Franklyn Quinlan, Fred N. Baynes, Tara M. Fortier, Qiugui Zhou, Allen Cross, Joe C. Campbell, and Scott A. Diddams
Opt. Lett. 39(6) 1581-1584 (2014)

Optical-fiber pulse rate multiplier for ultralow phase-noise signal generation

A. Haboucha, W. Zhang, T. Li, M. Lours, A. N. Luiten, Y. Le Coq, and G. Santarelli
Opt. Lett. 36(18) 3654-3656 (2011)

Low phase noise microwave extraction from femtosecond laser by frequency conversion pair and IF-domain processing

Yitang Dai, Qizhuang Cen, Lei Wang, Yue Zhou, Feifei Yin, Jian Dai, Jianqiang Li, and Kun Xu
Opt. Express 23(25) 31936-31944 (2015)

Photodetection system immune to amplitude-to-phase conversion noise for ultralow noise photonic microwave generation

Lingke Wang, Junchao Huang, Yifei Duan, Liang Liu, and Tang Li
Opt. Lett. 43(20) 5122-5125 (2018)

Ultra-low phase noise microwave generation with a free-running monolithic femtosecond laser

Manoj Kalubovilage, Mamoru Endo, and Thomas R. Schibli
Opt. Express 28(17) 25400-25409 (2020)