OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Vol. 39, Iss. 1 — Jan. 1, 2000
  • pp: 124–128

Guided wave acousto-optic and electro-optic tunable filter designs with relaxed beam-splitter requirements

Henry F. Taylor and Ohannes Eknoyan  »View Author Affiliations


Applied Optics, Vol. 39, Issue 1, pp. 124-128 (2000)
http://dx.doi.org/10.1364/AO.39.000124


View Full Text Article

Enhanced HTML    Acrobat PDF (104 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

New designs for acousto-optic tunable filters and electro-optic tunable filters with the Mach–Zehnder configuration are proposed. The new designs differ from conventional designs in three respects: (1) polarizing beam splitters are not required, (2) the optical path difference for the waveguides between the beam splitters is a half-wavelength, and (3) the relative positions of the polarization coupling regions in the two waveguides are displaced in the propagation direction by half of the spatial period of the perturbation responsible for the coupling. Because the new designs provide an additional degree of freedom in achieving the required beam-splitter performance, they are expected to be much easier to fabricate than conventional filter designs with polarizing beam splitters.

© 2000 Optical Society of America

OCIS Codes
(120.2440) Instrumentation, measurement, and metrology : Filters
(130.0130) Integrated optics : Integrated optics
(130.3120) Integrated optics : Integrated optics devices
(130.3730) Integrated optics : Lithium niobate

History
Original Manuscript: March 15, 1999
Revised Manuscript: August 19, 1999
Published: January 1, 2000

Citation
Henry F. Taylor and Ohannes Eknoyan, "Guided wave acousto-optic and electro-optic tunable filter designs with relaxed beam-splitter requirements," Appl. Opt. 39, 124-128 (2000)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-39-1-124


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. F. Bolodeau, D. C. Johnson, S. Theriault, B. Malo, J. Albert, K. O. Hill, “An all-fiber dense wavelength division multiplexer/demultiplexer using photoimprinted Bragg gratings,” IEEE Photon. Technol. Lett. 7, 388–390 (1995). [CrossRef]
  2. L. Dong, P. Hua, T. A. Birks, L. Reekie, P. S. J. Russell, “Novel add/drop filters for wavelength-division-multiplexing optical fiber systems using a Bragg grating assisted mismatched coupler,” IEEE Photon. Technol. Lett. 8, 1656–1658 (1996). [CrossRef]
  3. K. Hsu, C. M. Miller, Y. Bao, “Fiber Fabry–Perot interferometers with very low polarization sensitivity,” Appl. Opt. 33, 6617–6620 (1994). [CrossRef] [PubMed]
  4. L. Stone, L. W. Stulz, “High-performance fibre Fabry-Perot filters,” Electron. Lett. 27, 2239–2240 (1991). [CrossRef]
  5. C. Dragone, “An NxN optical multiplexer using a planar arrangement of 2 star couplers,” IEEE Photon. Technol. Lett. 3, 812–815 (1991). [CrossRef]
  6. C. Dragone, “Efficient technique for widening the passband of a wavelength router,” J. Lightwave Technol. 16, 1895–1906 (1998). [CrossRef]
  7. E. L. Wooten, R. L. Stone, E. W. Miles, E. M. Bradley, “Rapidly tunable narrowband wavelength filter using LiNbO3 unbalanced Mach–Zehnder interferometers,” J. Lightwave Technol. 14, 2530–2536 (1996). [CrossRef]
  8. C. Kostrzewa, R. Moosburger, G. Fischbeck, B. Schuppert, K. Petermann, “Tunable polymer optical add/drop filter for multiwavelength networks,” IEEE Photon. Technol. Lett. 9, 1487–1489 (1996). [CrossRef]
  9. F. Tian, C. Harizi, H. Herrmann, V. Reimann, R. Ricken, U. Rust, W. Sohler, F. Wehrmann, S. Westenhofer, “Polarization-independent integrated optical, acoustooptically tunable double-stage wavelength filter in LiNbO3,” J. Lightwave Technol. 12, 1192–1196 (1994). [CrossRef]
  10. D. A. Smith, R. Chakravarthy, Z. Bao, J. E. Baran, J. L. Jackel, A. d’Alessandro, D. J. Fritz, S. H. Huang, X. Y. Zou, S.-M. Hwang, A. E. Willner, K. D. Li, “Evolution of the acousto-optic wavelength routing switch,” J. Lightwave Technol. 14, 1005–1019 (1996). [CrossRef]
  11. W. Warzanski, F. Heismann, R. C. Alferness, “Polarization-independent electrooptically tunable narrow-band wavelength filter,” Appl. Phys. Lett. 53, 13–15 (1988). [CrossRef]
  12. Z. Tang, O. Eknoyan, H. F. Taylor, “Polarization-independent electro-optically tunable wavelength filter in LiTaO3,” Electron. Lett. 30, 1758–1759 (1994). [CrossRef]
  13. P. E. Green, Fiber Optic Networks (Prentice Hall, Englewood Cliffs, N. J., 1993), Chap. 4.
  14. H. F. Taylor, A. Yariv, “Guided wave optics,” Proc. IEEE 62, 1044–1060 (1974). [CrossRef]
  15. C. S. Tsai, “Guided wave acoustooptic Bragg modulator for wide-band integrated optic communications and signal processing,” IEEE Trans. Circuits Syst. 26, 1072–1098 (1979). [CrossRef]
  16. T. Pohlman, A. Neyer, E. Voges, “Polarization independent Ti:LiNbO3 switches and filters,” IEEE J. Quantum Electron. 27, 602–607 (1991). [CrossRef]
  17. F. Wehrmann, C. Harizi, H. Hermann, U. Rust, W. Sohler, S. Westenhofer, “Integrated optical, wavelength selective acoustooptically tunable 2 × 2 switches (add-drop multiplexers) in LiNbO3,” IEEE J. Sel. Top. Quantum Electron. 2, 263–269 (1996). [CrossRef]
  18. A. d’Alessandro, D. A. Smith, J. E. Baran, “Multichannel operation of an integrated acoustooptic wavelength routing switch for WDM systems,” IEEE Photon. Technol. Lett. 6, 390–393 (1994). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Figures

Fig. 1 Fig. 2 Fig. 3
 
Fig. 4 Fig. 5
 

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited