X-Ray Absolute Calibration of the Time Response of a Silicon Photodiode
Applied Optics, Vol. 41, Issue 25, pp. 5209-5217 (2002)
http://dx.doi.org/10.1364/AO.41.005209
Acrobat PDF (1157 KB)
Abstract
The time-dependent response of a 1-mm2 silicon photodiode was characterized by use of pulsed synchrotron radiation in the 4- to 16-nm-wavelength range. Modeling the input radiation pulse and the electrical response of the photodiode allowed the photodiode’s capacitance as a function of wavelength and applied bias voltage to be determined. The capacitance was in the 7- to 19-pF range and resulted in response fall times as small as 0.4 ns. The capacitance determined by pulsed x-ray illumination was in good agreement with the capacitance determined by pulsed optical laser illumination. The absolute responsivity was measured by comparison with the responsivity of a calibrated photodiode.
© 2002 Optical Society of America
[Optical Society of America ]
OCIS Codes
(040.5160) Detectors : Photodetectors
(040.6040) Detectors : Silicon
(040.7480) Detectors : X-rays, soft x-rays, extreme ultraviolet (EUV)
(230.5170) Optical devices : Photodiodes
Citation
John F. Seely, Craig N. Boyer, Glenn E. Holland, and James L. Weaver, "X-Ray Absolute Calibration of the Time Response of a Silicon Photodiode," Appl. Opt. 41, 5209-5217 (2002)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-41-25-5209
You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription





OSA is a member of 