OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: James C. Wyant
  • Vol. 46, Iss. 15 — May. 20, 2007
  • pp: 3046–3051

Acoustic grating fringe projector for high-speed and high-precision three-dimensional shape measurements

Xuebing Yin, Huijie Zhao, Junyu Zeng, and Yufu Qu  »View Author Affiliations


Applied Optics, Vol. 46, Issue 15, pp. 3046-3051 (2007)
http://dx.doi.org/10.1364/AO.46.003046


View Full Text Article

Enhanced HTML    Acrobat PDF (1935 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A new acoustic grating fringe projector (AGFP) was developed for high-speed and high-precision 3D measurement. A new acoustic grating fringe projection theory is also proposed to describe the optical system. The AGFP instrument can adjust the spatial phase and period of fringes with unprecedented speed and accuracy. Using rf power proportional-integral-derivative (PID) control and CCD synchronous control, we obtain fringes with fine sinusoidal characteristics and realize high-speed acquisition of image data. Using the device, we obtained a precise phase map for a 3D profile. In addition, the AGFP can work in running fringe mode, which could be applied in other measurement fields.

© 2007 Optical Society of America

OCIS Codes
(120.0120) Instrumentation, measurement, and metrology : Instrumentation, measurement, and metrology
(150.6910) Machine vision : Three-dimensional sensing
(230.1040) Optical devices : Acousto-optical devices

ToC Category:
Optical Devices

History
Original Manuscript: June 9, 2006
Revised Manuscript: September 1, 2006
Manuscript Accepted: September 8, 2006
Published: May 1, 2007

Citation
Xuebing Yin, Huijie Zhao, Junyu Zeng, and Yufu Qu, "Acoustic grating fringe projector for high-speed and high-precision three-dimensional shape measurements," Appl. Opt. 46, 3046-3051 (2007)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-46-15-3046


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. D. R. Burton, A. J. Godall, J. T. Atkinson, and M. J. Lalor, "The use of carrier frequency shifting for the elimination of phase discontinuities in Fourier transform profilometry," Opt. Lasers Eng. 23, 245-257 (1995). [CrossRef]
  2. M. Takeda, W. Gu, M. Kinoshita, H. Takai, and Y. Takahashi, "Frequency-multiplex Fourier-transform profilomertry: a single-shot three-dimensional shape measurement of objects with large height discontinuities and/or surface isolations," Appl. Opt. 36, 5347-5354 (1997). [CrossRef] [PubMed]
  3. G. J. Swanson, M. P. Kavalauskas, and L. G. Shirley, "High-precision surface profiling with broadband accordion fringe interlerometry," Proc. SPIE 4189, 161-169 (2001). [CrossRef]
  4. C. E. Towers, D. P. Towers, and J. D. C. Jones, "Optimum frequency selection in multifrequency interferometry," Opt. Lett. 28, 887-889 (2003). [CrossRef] [PubMed]
  5. X. Peng, J. Tian, P. Zhang, L. Wei, W. Qiu, E. Li, and D. Zhang, "Dynamic 3-D profilometry with dual-acousto-optic fringe projection," Proc. SPIE 5638, 456-463 (2005). [CrossRef]
  6. K.-P. Proll, J.-M. Nivet, C. Voland, and H. J. Tiziani, "Application of a liquid-crystal spatial light modulator for brightness adaptation in microscopic topometry," Appl. Opt. 39, 6430-6435 (2000). [CrossRef]
  7. D. S. Mehta, S. K. Dubey, M. M. Hossain, and C. Shakher, "Simple multifrequency and phase-shifting fringe-projection system based on two-wavelength lateral shearing interferometry for three-dimensional profilometry," Appl. Opt. 44, 7515-7521 (2000). [CrossRef]
  8. M. S. Mermeistein, D. L. Feldkhum, and L. G. Shirley, "Video-rate surface profiling with acousto-optic accordion fringe interferometry," Opt. Eng. 39, 106-113 (2000). [CrossRef]
  9. J. Xu, Principle, Design, and Applications of Acousto-optic Devices (Science Press, 1982), pp. 65-67.
  10. A. P. Goutzoulis, Design and Fabrication of Acousto-optic Devices (Marcel Dekker, 1994), pp. 43-44.
  11. G. Indebetouw, "Profile measurement using projection of running fringes," Appl. Opt. 17, 2930-2933 (1978). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article

OSA is a member of CrossRef.

CrossCheck Deposited