OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: Joseph N. Mait
  • Vol. 48, Iss. 32 — Nov. 10, 2009
  • pp: 6105–6110

Long-term stabilization of a heterodyne metrology interferometer down to a noise level of 20 pm over an hour

Yoshito Niwa, Koji Arai, Akitoshi Ueda, Masaaki Sakagami, Naoteru Gouda, Yukiyasu Kobayashi, Yoshiyuki Yamada, and Taihei Yano  »View Author Affiliations


Applied Optics, Vol. 48, Issue 32, pp. 6105-6110 (2009)
http://dx.doi.org/10.1364/AO.48.006105


View Full Text Article

Enhanced HTML    Acrobat PDF (541 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A heterodyne metrology interferometer was stabilized down to a noise level of 20 picometers (pm) as a root-mean-square (RMS) value integrated between 0.3 mHz and 1 Hz . This noise level was achieved by employing active and passive interferometer stabilization techniques. The heterodyne interferometer was built on a 50 mm square ultralow expansion glass plate in order to reduce an optical path length change caused by temperature variation. An optical configuration of the interferometer is a Mach– Zehnder interferometer with a design as symmetric as possible so that a detection signal can be insensitive to homogeneous thermal expansion of the glass plate. The heterodyne frequency is actively controlled in order to suppress residual noises caused by optical path length changes outside of the glass plate as well as phase fluctuations of the heterodyne frequency source. Our stabilization scheme is considered useful in achieving the 20 pm noise level without a stable heterodyne frequency source, as well as temperature stabilization around a whole apparatus. This interferometer can be used in precise metrology applications, such as characterization of deformation for satellite optical components against thermal exposure.

© 2009 Optical Society of America

OCIS Codes
(120.3180) Instrumentation, measurement, and metrology : Interferometry
(120.3930) Instrumentation, measurement, and metrology : Metrological instrumentation
(120.5050) Instrumentation, measurement, and metrology : Phase measurement

ToC Category:
Instrumentation, Measurement, and Metrology

History
Original Manuscript: June 15, 2009
Revised Manuscript: October 3, 2009
Manuscript Accepted: October 9, 2009
Published: November 2, 2009

Citation
Yoshito Niwa, Koji Arai, Akitoshi Ueda, Masaaki Sakagami, Naoteru Gouda, Yukiyasu Kobayashi, Yoshiyuki Yamada, and Taihei Yano, "Long-term stabilization of a heterodyne metrology interferometer down to a noise level of 20 pm over an hour," Appl. Opt. 48, 6105-6110 (2009)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-48-32-6105


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. T. Schuldt, M. Gohlke, D. Weise, U. Johann, A. Peters, and C. Braxmaier, “Picometer and nanoradian optical heterodyne interferometry for translation and tilt metrology of the LISA gravitational reference sensor,” Class. Quantum Grav. 26, 085008 (2009). [CrossRef]
  2. T. Schuldt, M. Gohlke, D. Weise, A. Peters, U. Johann, and C. Braxmaier, “A compact high-sensitivity heterodyne interferometer for industrial metrology,” Proc. SPIE 7003, 70030Y (2008). [CrossRef]
  3. J. C. Machado, T. Heinrich, T. Schuldt, M. Gohlke, S. Lucarelli, D. Weise, U. Johann, A. Peters, and C. Braxmaier, “Picometer resolution interferometric characterization of the dimensional stability of zero CTE CFRP,” Proc. SPIE 7018, 70183D (2008). [CrossRef]
  4. X. An, D. S. Marx, R. Goullioud, and F. Zhao, “Laser metrology in the micro-arcsecond metrology testbed,” Proc. SPIE 5634, 293-303 (2005). [CrossRef]
  5. F. Zhao, J. E. Logan, S. Shaklan, and M. Shao, “A common-path, multi-channel heterodyne laser interferometer for sub-nanometer surface metrology,” Proc. SPIE 3740, 642-645(1999). [CrossRef]
  6. K. Numata and J. Camp, “Interferometric testbed for nanometer level stabilization of environmental motion over long time scales,” Appl. Opt. 47, 6832-6841 (2008). [CrossRef] [PubMed]
  7. N. Gouda, Y. Kobayashi, Y. Yamada, T. Yano, and JASMINE Working Group, “Infrared space astrometry project JASMINE,” in Proceedings of IAU Symposium No. 248, A Giant Step: from Milli- to Micro-arcsecond Astrometry, W. J. Jin, I. Platais, and M. A. C. Perryman, eds. (Cambridge Univ. Press, 2008), pp. 248-251.
  8. W. Hou and X. Zhao, “Drift of nonlinearity in the heterodyne interferometer,” Precis. Eng. 16, 25-35 (1994). [CrossRef]
  9. C. M. Wu, J. Lawall, and R. D. Deslattes, “Heterodyne interferometer with subatomic periodic nonlinearity,” Appl. Opt. 38, 4089-4094 (1999). [CrossRef]
  10. P. G. Halverson and F. M. Loya, “Signal processing for order 10 pm accuracy displacement metrology in real-world scientific applications,” in Proceedings of the 5th International Conference on Space Optics (ICSO 2004), B. Warmbein, ed. (ESA, 2004), pp. 571-577.
  11. G. Heinzel, C. Braxmaier, M. Caldwell, K. Danzmann, F. Draaisma, A. García, J. Hough, O. Jennrich, U. Johann, C. Killow, K. Middleton, M. te Plate, D. Robertson, A. Rüdiger, R. Schilling, F. Steier, V. Wand, and H. Ward, “Successful testing of the LISA Technology Package (LTP) interferometer engineering model,” Class. Quantum Grav. 22, S149-S154 (2005). [CrossRef]
  12. E. J. Elliffe, J. Bogenstahl, A. Deshpande, J. Hough, C. Killow, S. Reid, D. Robertson, S. Rowan, H. Ward, and G. Cagnoli, “Hydroxide-catalysis bonding for stable optical systems for space,” Class. Quantum Grav. 22, S257-S267 (2005). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited