OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: Joseph N. Mait
  • Vol. 52, Iss. 31 — Nov. 1, 2013
  • pp: 7407–7410

Multiring large-mode-area delivery fiber for high power

Lu Li, Aidong Zhang, Huan Zhan, Jianli He, Tengfei Shi, Zhiguang Zhou, Xusheng Xiao, and Aoxiang Lin  »View Author Affiliations


Applied Optics, Vol. 52, Issue 31, pp. 7407-7410 (2013)
http://dx.doi.org/10.1364/AO.52.007407


View Full Text Article

Enhanced HTML    Acrobat PDF (534 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

The study presents a novel design of multiring delivery fiber with large mode area for high power. Using a FiberCAD method, we investigated a fiber whose core is surrounded by alternative low- and high-index rings. Based on our calculation, the effective area is 400μm2 at 1.08 μm, larger than the 280μm2 of conventional step-index fiber (20/400). The macrobending loss at 1.08 μm is estimated to be 1×103dB/m, approximately one-third that of conventional step-index fiber (20/400). The single-mode operation can be achieved by the macrobending loss contrast between the fundamental mode (<1dB/m) and high-order mode (>100dB/m). The results indicate that multiring delivery fiber fabricated by modified chemical vapor deposition process is a promising candidate for high-power transmission.

© 2013 Optical Society of America

OCIS Codes
(060.2280) Fiber optics and optical communications : Fiber design and fabrication
(060.2290) Fiber optics and optical communications : Fiber materials
(060.2430) Fiber optics and optical communications : Fibers, single-mode
(140.3613) Lasers and laser optics : Lasers, upconversion

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: June 24, 2013
Manuscript Accepted: September 25, 2013
Published: October 21, 2013

Citation
Lu Li, Aidong Zhang, Huan Zhan, Jianli He, Tengfei Shi, Zhiguang Zhou, Xusheng Xiao, and Aoxiang Lin, "Multiring large-mode-area delivery fiber for high power," Appl. Opt. 52, 7407-7410 (2013)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-52-31-7407


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. A. Galvanauskas, “High power fiber lasers,” Opt. Photon. News 15, 42–47 (2004).
  2. I. P. G. Photonics, “IPG photonics successfully tests world’s first 10 kilowatt single-mode production laser,” June 15, 2009, http://www.ipgphotonics.com/newsproduct.htm .
  3. Y. Jeong, J. Sahu, D. Payne, and J. Nilsson, “Ytterbium-doped large-core fiber laser with 1.36  kW continuous-wave output power,” Opt. Express 12, 6088–6092 (2004). [CrossRef]
  4. V. Fomin, A. Mashkin, M. Abramov, A. Ferin, and V. Gapontsev, and IPG Laser GmbH, “3  kW Yb fiber lasers with a single-mode output,” presented at International Symposium on High-Power Fiber Lasers and Their Applications (St. Petersburg, Russia, 2006).
  5. M. J. Li, X. Chen, A. Liu, S. Gray, J. Wang, D. T. Walton, and L. A. Zenteno, “Limit of effective area for single-mode operation in step-index large mode area laser fibers,” J. Lightwave Technol. 27, 3010–3016 (2009). [CrossRef]
  6. J. Fini, “Intuitive modeling of bend distortion in large-mode-area fibers,” Opt. Lett. 32, 1632–1634 (2007). [CrossRef]
  7. L. Faustini and G. Martini, “Bend loss in single-mode fibers,” J. Lightwave Technol. 15, 671–679 (1997). [CrossRef]
  8. M. Fermann, “Single-mode excitation of multimode fibers with ultrashort pulses,” Opt. Lett. 23, 52–54 (1998). [CrossRef]
  9. J. Sousa and O. Okhotnikov, “Multimode Er-doped fiber for single-transverse-mode amplification,” Appl. Phys. Lett. 74, 1528–1530 (1999). [CrossRef]
  10. J. Koplow, D. Kliner, and L. Goldberg, “Single-mode operation of a coiled multimode fiber amplifier,” Opt. Lett. 25, 442–444 (2000). [CrossRef]
  11. E. Yablonovitch, “Inhibited spontaneous emission in solid-state physics and electronics,” Phys. Rev. Lett. 58, 2059–2062 (1987). [CrossRef]
  12. S. John, “Strong localization of photons in certain disordered dielectric superlattices,” Phys. Rev. Lett. 58, 2486–2489 (1987). [CrossRef]
  13. J. Limpert, T. Schreiber, S. Nolte, H. Zellmer, T. Tunnermann, R. Lliew, F. Lederer, J. Broeng, G. Viene, A. Petersson, and C. Jakobsen, “High-power air-clad large-mode-area photonic crystal fiber laser,” Opt. Express 11, 818–823 (2003). [CrossRef]
  14. J. Limpert, N. Deguil-Robin, I. Manek-Hönninger, F. Salin, F. Röser, A. Liem, T. Schreiber, S. Nolte, H. Zellmer, A. Tünnermann, J. Broeng, A. Petersson, and C. Jakobsen, “High-power rod-type photonic crystal fiber laser,” Opt. Express 13, 1055–1058 (2005). [CrossRef]
  15. J. Limpert, A. Liem, M. Reich, T. Schreiber, S. Nolte, H. Zellmer, A. Tunnermann, J. Broeng, A. Petersson, and C. Jakobsen, “Low-nonlinearity single-transverse-mode ytterbium-doped photonic crystal fiber amplifier,” Opt. Express 12, 1313–1319 (2004). [CrossRef]
  16. T. Birks, J. Knight, and P. Russell, “Endlessly single-mode photonic crystal fiber,” Opt. Express 22, 961–963 (1997).
  17. F. Roser, T. Eidam, J. Rothhardt, O. Schmidt, D. N. Schimpf, J. Limpert, and A. Tunnermann, “Millijoule pulse energy high repetition rate femtosecond fiber chirped-pulse amplification system,” Opt. Lett. 32, 3495–3497 (2007). [CrossRef]
  18. L. Dong, X. Peng, and J. Li, “Leakage channel optical fibers with large effective area,” J. Opt. Soc. Am. B 24, 1689–1697 (2007). [CrossRef]
  19. C. Zhu, I. Hu, X. Ma, and A. Galvanauskas, “Single-frequency and single-transverse mode Yb-doped CCC fiber MOPA with robust polarization SBS-free 511  W output,” in Advances in Optical Materials, OSA Technical Digest (CD) (Optical Society of America, 2011), paper AMC5.
  20. S. Feverier, R. Jamier, and J. M. Blondy, “Low-loss singlemode large mode area all-silica photonic bandgap fiber,” Opt. Express 14, 562–569 (2006). [CrossRef]
  21. P. Wang, L. J. Cooper, J. K. Sahu, and W. A. Clarkson, “Efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser,” Opt. Lett. 31, 226–228 (2006). [CrossRef]
  22. Y. Chen, T. McComb, V. Sudesh, M. Richardson, and M. Bass, “Very large-core, single-mode, gain-guided, index-antiguided fiber lasers,” Opt. Lett. 32, 2505–2507 (2007). [CrossRef]
  23. P. R. Watekar, S. Ju, and W. T. Han, “Near zero bending loss in a double-trenched bend insensitive optical fiber at 1550  nm,” Opt. Express 17, 20155–20166 (2009). [CrossRef]
  24. K. Petermann, “Microbending loss in monomode fibers,” Electron. Lett. 12, 107–109 (1976). [CrossRef]
  25. D. Marcuse, “Curvature loss formula for optical fibers,” J. Opt. Soc. Am. 66, 216–220 (1976). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited