Abstract

Field experience using infrared radiometers for making airborne measurements of land and ocean surface temperature show that an atmospheric induced error and a surface reflectivity error are present when the 8–14-μ atmospheric window is used. It is generally accepted that the error can be minimized by working in a narrow region of the atmospheric window centered about 10.5 μ. In order to evaluate the improvement in performance using the narrow band filter region, simultaneous airborne measurements were made with two Barnes model PRT-5 infrared radiometers flown side by side over land and water areas for a range of altitudes up to 8000 ft (2440 m). One radiometer contained an 8–14-μ (standard) filter, and the second contained a 10–12-μ filter. Comparison of the data shows the narrow band filter to reduce the measured error 1.5–2.0 times compared with the wide band filter. The data also show that the error increases approximately linearly with altitude, and therefore by taking measurement at two altitudes and linearly extrapolating to ground level, an accuracy of measurement of a few tenths of a degree Celsius is possible.

© 1971 Optical Society of America

Measured and Calculated Earth–Atmosphere Radiance in the 8–14-μ Window as a Function of Altitude

M. Griggs
Appl. Opt. 8(1) 171-177 (1969)

A Radiometric System for Airborne Measurement of the Total Heat Flow from the Sea

E. D. McAlister and W. McLeish
Appl. Opt. 9(12) 2697-2705 (1970)

Atmospheric Emission Measurements with a Balloon-Borne Michelson Interferometer

R. E. Jennings and A. F. M. Moorwood
Appl. Opt. 10(10) 2311-2318 (1971)

Infrared Aircraft Spectra Over Desert Terrain 8.5 μ to 16 μ

W. A. Hovis, L. R. Blaine, and William R. Callahan
Appl. Opt. 7(6) 1137-1140 (1968)

Temperature Measurements of Natural Surfaces Using Infrared Radiometers

Dieter Lorenz
Appl. Opt. 7(9) 1705-1710 (1968)