Abstract
A new method for high-efficiency interconnection of two planar optical waveguides is described. This technique is based on mode-matched coupling and is particularly useful when the difference between the refractive indices of the individual guides is large. The method consists of etching a deep vertical step in the high-index waveguide followed by the deposition of low-index waveguide on the etched section so that the two guides remain connected end to end. A theoretical treatment for the design of the coupler and for determination of fabricational tolerences is given. Couplers were fabricted using high-index waveguides like GaAs and LiNbO3 and low-index waveguides made up of glass or solution-deposited (polyurethane or photoresist) films on SiO2 substrate. It is shown that by controlling the junction profile, efficiencies close to theoretical values can be obtained. Some applications of such a coupler are given.
© 1980 Optical Society of America
Full Article | PDF ArticleMore Like This
Pochi Yeh and H. F. Taylor
Appl. Opt. 19(16) 2848-2855 (1980)
L. D. Hutcheson
Appl. Opt. 19(13) 2247-2250 (1980)
K. Mitsunaga, K. Murakami, M. Masuda, and J. Koyama
Appl. Opt. 19(22) 3837-3842 (1980)