Abstract

We present the results of intrapulse frequency chirping measurements that were carried out on a TEA CO₂ laser equipped with various conventional and unconventional frequency-selective optical cavities. We experimentally demonstrate that there is a close relationship between the causes and the extent of intrapulse frequency chirping on the one hand and the type of optical configuration that is used for controlling the laser mode behavior on the other. In particular, it is shown that intrapulse chirping of the emitted frequency can be significantly reduced by employing laser cavities terminating in high-finesse reflective multipass interferometers for single-mode selection. In fact, this type of cavity can be designed in such a way to minimize the effects on the emitted frequency of perturbations affecting the cavity optical length.

© 1991 Optical Society of America

Longitudinal-mode selectivity and perturbation sensitivity of multimirror laser cavities

Elia Palange and G. Salvetti
Appl. Opt. 30(27) 3821-3831 (1991)

Reflective high-finesse interferometers as effective intrapulse laser frequency stabilizers

E. Palange and G. Salvetti
Opt. Lett. 15(12) 676-678 (1990)

Optical cavity design for long pulse excimer lasers

Terrence J. McKee
Appl. Opt. 30(6) 635-644 (1991)

Two- and three-grating resonators for high-power pulsed CO₂ lasers

Jerald R. Izatt, Mohammed A. Rob, and Wen-sen Zhu
Appl. Opt. 30(30) 4319-4329 (1991)

CO₂ laser for lidar applications, producing two narrowly spaced independently wavelength-selectable Q-switched output pulses

Harley V. Piltingsrud
Appl. Opt. 30(27) 3952-3963 (1991)