Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Characteristics of polymeric optical passive single-mode waveguiding devices fabricated by an argon-ion laser

Not Accessible

Your library or personal account may give you access

Abstract

The fabrication of polymeric single-mode Gaussian profile optical waveguides is described. We used poly(methyl methacrylate) and a mixture of two intermiscible monomers for the cladding and the core, respectively, of the waveguides. The cores of the waveguides were fabricated by with an argon-ion laser beam. The waveguides had single-mode Gaussian refractive-index profiles. By using such waveguides, we fabricated directional couplers for power coupling to the adjacent waveguides and also parallel waveguide arrays for preventing power coupling to adjacent waveguides for use in interconnect chips. We analyzed the characteristics of these couplers by using the coupled-mode theory and compared the results with those obtained with the beam propagation method. Experimental results showed good correlation with the theoretical values. We designed optical bus arrays for interconnect chips, considering the variation of normalized frequency V, the power penalty, and the dimensions of the waveguides and the separation between them. The number of waveguides in the bus array increased with increasing V. For a known value of V, a waveguide’s density increases with a decrease of its dimensions. The theoretical maximum number of waveguides is ∼1490/cm and ∼846/cm for 2 μm × 2 μm and 4 μm × 4 μm single-mode waveguides, respectively, to satisfy a 1-dB power penalty criterion at bit-error rate of 10-9. We fabricated interconnect bus arrays with fifteen 4 μm × 4 μm waveguides for a 3-cm coupling length, and the experimental results were verified to be in good agreement with the theoretical values.

© 1998 Optical Society of America

Full Article  |  PDF Article
More Like This
Single-mode optical waveguides fabricated from fluorinated polyimides

Junya Kobayashi, Tohru Matsuura, Shigekuni Sasaki, and Tohru Maruno
Appl. Opt. 37(6) 1032-1037 (1998)

Stable, low-loss optical waveguides and micromirrors fabricated in acrylate polymers

J. P. D. Cook, G. O. Este, F. R. Shepherd, W. D. Westwood, J. Arrington, W. Moyer, J. Nurse, and S. Powell
Appl. Opt. 37(7) 1220-1226 (1998)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (11)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (13)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.