Design and Tolerance Analysis of a Router with an Amplified Resonator and Bragg Gratings
Applied Optics, Vol. 39, Issue 12, pp. 1934-1940 (2000)
http://dx.doi.org/10.1364/AO.39.001934
Acrobat PDF (131 KB)
Abstract
A novel ring resonator configuration with Bragg gratings is presented. The stability of this configuration is studied by a z-transform technique. A router design with a FWHM of 17 MHz, a −40-dB rejection ratio, and a 15-dB gain at the output port is reported. The influence of temperature and of fabrication tolerance on parameters of this router configuration implemented with fiber technology is reviewed. Deviations in design specification owing to parameter variations are studied and compensated for with a gain control of 2.4% in a specific design.
© 2000 Optical Society of America
OCIS Codes
(060.0060) Fiber optics and optical communications : Fiber optics and optical communications
(060.1810) Fiber optics and optical communications : Buffers, couplers, routers, switches, and multiplexers
(060.2320) Fiber optics and optical communications : Fiber optics amplifiers and oscillators
(060.2340) Fiber optics and optical communications : Fiber optics components
(060.2360) Fiber optics and optical communications : Fiber optics links and subsystems
(070.4340) Fourier optics and signal processing : Nonlinear optical signal processing
Citation
Carmen Vázquez, Salvador Vargas, and José Manuel Sánchez Pena, "Design and Tolerance Analysis of a Router with an Amplified Resonator and Bragg Gratings," Appl. Opt. 39, 1934-1940 (2000)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-39-12-1934
You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
Related Journal Articles 
- Soliton amplification and reshaping by a second-harmonic-generating nonlinear amplifier (JOSAB)
- All-fiber coherent beam combining of fiber lasers (OL)
- Modulation of Coupling in a Photonic Switch by Resonant Interference (AO)
- Analysis of an Optically Controlled Photonic Switch (AO)
- Room-temperature multiwavelength erbium-doped fiber ring laser employing sinusoidal phase-modulation feedback (OL)
Related Conference Papers
- Effect of Operational Parameters and Their Interplay in Differential Cross-Phase-Modulation Wavelength Converters
- Single-Gate 320-to-8x40 Gb/s Demultiplexing
- Single-Gate 320-to-8x40 Gb/s Demultiplexing
- 10 x 112-Gb/s PDM 16-QAM Transmission over 630 km of Fiber with 6.2-b/s/Hz Spectral Efficiency
- 10 x 112-Gb/s PDM 16-QAM Transmission over 630 km of Fiber with 6.2-b/s/Hz Spectral Efficiency
- 10-Packet-Depth, 40 Gb/s Optical Buffer with a <0.5 ns Reconfiguration Time Using 116 ns, Continuously Tunable Conversion/Dispersion Delays
- 10-Packet-Depth, 40 Gb/s Optical Buffer with a <0.5 ns Reconfiguration Time Using 116 ns, Continuously Tunable Conversion/Dispersion Delays
- Modulation-Format-Independent Wavelength Conversion
- Modulation-Format-Independent Wavelength Conversion
« Previous Article | Next Article »
OSA is a member of 