The switching behaviors of cascaded nonlinear couplers were investigated. They have nearly ideal digital-switching characteristics, and their output power levels can be adjusted by means of varying the nonlinear coupling coefficient of the final coupler. The two-input excitation nonlinear cascaded couplers can perform not only switching operations but also a series of logic operations. The logic operations depend mainly on the coupling length of the two-input coupler and its initial inputs. The power corresponding to the rising and falling ridge of the logic operating waveforms can be shifted effectively by means of varying the switching power of the reshaper. Allowable ranges of three important parameters—coupling length of the two-input coupler L₁, bias optical power P_bia, and phase difference ψ between the signal and bias beams for six fundamental logic operations—were calculated. Curves for design considerations and suggestions for the best choice of parameters for stable and reliable logic operations and, or, xor, nand, nor, and nxor are also presented individually.

© 2000 Optical Society of America

[Optical Society of America ]

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Log in to access OSA Member Subscription

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Log in to access OSA Member Subscription

You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Log in to access OSA Member Subscription

Related Journal Articles

• Soliton wavelength-division multiplexing system with channel-isolating notch filters (OL)
• Thermally Stable Narrow-Bandpass Filter Prepared by Reactive Ion-Assisted Sputtering (AO)
• Boundary element analysis of dielectric waveguides (JOSAA)
• Technology challenges for monolithically integrated waveguide demultiplexers (COL)
• Focus Issue Introduction: Nonlinear Photonics (OE)

Related Conference Papers

• 1.83-µs Wavelength-Transparent All-Optical Delay
• 1.83-µs Wavelength-Transparent All-Optical Delay
• Single-Gate 320-to-8x40 Gb/s Demultiplexing
• Single-Gate 320-to-8x40 Gb/s Demultiplexing
• Optical Performance Monitoring via Slow Light Enhanced Third Harmonic Generation in Silicon Photonic Crystal Waveguides
• Optical Performance Monitoring via Slow Light Enhanced Third Harmonic Generation in Silicon Photonic Crystal Waveguides
• First Demonstration of WDM-Enabled All-Optical Wavelength Conversion with a SOA and a 2^ndOrder Micro-Ring Resonator ROADM
• First Demonstration of WDM-Enabled All-Optical Wavelength Conversion with a SOA and a 2^ndOrder Micro-Ring Resonator ROADM
• Phase Preserving Wavelength Conversion over 6 THz in a Silicon Coupled Resonator Optical Waveguide
• Phase Preserving Wavelength Conversion over 6 THz in a Silicon Coupled Resonator Optical Waveguide