Abstract

Fabry–Perot bandpass filters made of mirrors with both high- and low-Δn (refractive-index modulation) have simultaneously a broad rejection band and a narrow passband. The higher Δn’s are obtained with multilayer mirrors and the lower with Bragg gratings (BG’s). Implementation of a sampling calculation technique based on the characteristic matrix formalism used for interference coatings allows for simulation of hybrid filters constructed from multilayer mirrors and BG’s. The possible defects of hybrid filters are extensively analyzed. Bandpass filters made purely of both high- and low-Δn BG’s are also simulated. All these filters are useful for wavelength division multiplexing applications.

© 2001 Optical Society of America

Bicorn filters with strong and broad rejection for single-mode waveguides

Jean Bittebierre and Basile Lazaridès
Appl. Opt. 40(28) 5028-5033 (2001)

Ultranarrow bandpass hybrid filter with wide rejection band

Julien Lumeau, Michel Cathelinaud, Jean Bittebierre, and Michel Lequime
Appl. Opt. 45(7) 1328-1332 (2006)

Reduction of the diffraction in strongly resonant thin-film Fabry–Perot filters between single-mode fibers

Jean Bittebierre
Appl. Opt. 52(16) 3645-3654 (2013)

Stepwise graded refractive-index profiles for design of a narrow-bandpass filter

Xinrong Wang, Hiroshi Masumoto, Yoshihiro Someno, Lidong Chen, and Toshio Hirai
Appl. Opt. 40(22) 3746-3752 (2001)

Narrow-linewidth bandpass filters with diffractive thin-film layers

S. Tibuleac and R. Magnusson
Opt. Lett. 26(9) 584-586 (2001)