OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: James C. Wyant
  • Vol. 46, Iss. 16 — Jun. 1, 2007
  • pp: 3196–3204

Analysis of a two-dimensional photonic bandgap structure fabricated by an interferometric lithographic system

Cheng-Wei Chien, Yun-Chih Lee, Po-Shen Lee, Jenq-Yang Chang, and Jyh-Chen Chen  »View Author Affiliations


Applied Optics, Vol. 46, Issue 16, pp. 3196-3204 (2007)
http://dx.doi.org/10.1364/AO.46.003196


View Full Text Article

Enhanced HTML    Acrobat PDF (1734 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

An interferometric lithographic technique and double exposure method are applied to theoretically and experimentally investigate several kinds of 2D periodic structures. The shape, lattice symmetries, and lattice constants of the 2D structures, for different substrate rotational angles, are obtained from the simulated predictions. The shape of the 2D structures can be varied by controlling the rotational angle of the substrate and the development process, and they are validated experimentally. The variation of the lattice symmetry of the 2D structure with the substrate rotational angle is discussed in detail in relation to the axial angle and lattice constant. It is found that square, circular, rectangular, and elliptical scatterers which are arranged in parallelogram, triangular, and square lattices (with different lattice constants) can be obtained. The photonic bandgaps for each condition are also investigated. When the substrate rotational angles are the same, the normalized frequency ( ω a / 2 π c ) of photonic bandgap structures with an equal filling factor are very similar regardless of the interference angle. The results are helpful in designing the forbidden frequency when the lattice constant and the scatterer shape can be controlled by the interferometric lithographic technique.

© 2007 Optical Society of America

OCIS Codes
(220.4000) Optical design and fabrication : Microstructure fabrication
(260.3160) Physical optics : Interference

ToC Category:
Physical Optics

History
Original Manuscript: November 27, 2006
Revised Manuscript: January 26, 2007
Manuscript Accepted: January 30, 2007
Published: May 15, 2007

Citation
Cheng-Wei Chien, Yun-Chih Lee, Po-Shen Lee, Jenq-Yang Chang, and Jyh-Chen Chen, "Analysis of a two-dimensional photonic bandgap structure fabricated by an interferometric lithographic system," Appl. Opt. 46, 3196-3204 (2007)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-46-16-3196


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. X. Chen, Z. Zhang, S. R. J. Brueck, R. A. Carpio, and J. S. Petersen, "Process development for 180 nm structures using interferometric lithography and I-line photoresist," in Emerging Lithographic Technologies, D. E. Seeger, ed., Proc. SPIE 3048, 309-318 (1997).
  2. S. H. Zaidi and S. R. J. Brueck, "Multiple-exposure interferometric lithography," J. Vac. Sci. Technol. B 11, 658-666 (1993). [CrossRef]
  3. N. D. Lai, W. P. Liang, J. H. Lin, and C. C. Hsu, "Rapid fabrication of large-area periodic structures containing well-defined defects by combining holography and mask techniques," Opt. Express 13, 5331-5337 (2005). [CrossRef] [PubMed]
  4. E. J. Yablonovitch, "Photonic bandgap structures," J. Opt. Soc. Am. B 10, 283-295 (1993). [CrossRef]
  5. S. Noda, K. Tomoda, N. Yamamoto, and A. Chutinan, "Full three-dimensional photonic bandgap crystals at near-infrared wavelengths," Science 289, 604-606 (2000). [CrossRef] [PubMed]
  6. K. Srinivasan, P. E. Barclay, O. Painter, J. Chen, A. Y. Cho, and C. Gmachl, "Experimental demonstration of a high quality factor photonic crystal microcavity," Appl. Phys. Lett. 83, 1915-1917 (2003). [CrossRef]
  7. K. S. L. Kenneth, B. Jose, B. K. T. Kenneth, C. Manish, A. J. A. Gehan, I. M. William, H. M. Gareth, and K. G. Karen, "Superhydrophobic carbon nanotube forests," Nano Lett. 3, 1701-1705 (2003). [CrossRef]
  8. R. Furstner, W. Barthlott, C. Neinhuis, and P. Walzel, "Wetting and self-cleaning properties of artificial superhydrophobic surfaces," Langmuir 21, 956-961 (2005). [CrossRef] [PubMed]
  9. R. Z. Wang, X. H. Wang, B. Y. Gu, and G. Z. Yang, "Effects of shapes and orientations of scatterers and lattice symmetries on the photonic bandgap in two-dimensional photonic crystals," J. Appl. Phys. 90, 4307-4313 (2001). [CrossRef]
  10. W. M. Kuang, Z. L. Hou, and Y. Y. Liu, "The effects of shapes and symmetries of scattererers on the phononic bandgap in 2D phononic crystals," Phys. Lett. A 322, 481-490 (2004). [CrossRef]
  11. C. C. Cheng and A. Scherer, "Fabrication of photonic bandgap crystals," J. Vac. Sci. Technol. B 13, 2696-2700 (1995). [CrossRef]
  12. E. Chow, S. Y. Lin, and J. R. Wendt, "Quantitative analysis of bending efficiency in photonic crystal waveguide bends at λ = 1.55 μm wavelengths," Opt. Lett. 26, 286-288 (2001). [CrossRef]
  13. L. Pang, W. Nakagawa, and Y. Fainman, "Fabrication of two-dimensional photonic crystals with controlled defects by use of multiple exposures and direct write," Appl. Opt. 42, 5450-5456 (2003). [CrossRef] [PubMed]
  14. F. Quiñónez, J. W. Menezes, L. Cescato, V. F. Rodriguez-Esquerre, H. Hernandez-Figueroa, and R. D. Mansano, "Bandgap of hexagonal 2D photonic crystals with elliptical holes recorded by interference lithography," Opt. Express 14, 8578-8583 (2006). [CrossRef]
  15. J. W. Menezes, L. Cescato, E. J. de Carvalho, and E. S. Braga, "Recording different geometries of 2D hexagonal photonic crystals by choosing the phase between two-beam interference exposures," Opt. Express 14, 4873-4879 (2006). [CrossRef] [PubMed]
  16. A. Fernandez and D. W. Phillion, "Effects of phase shifts on four-beam interference patterns," Appl. Opt. 37, 473-478 (1998). [CrossRef]
  17. I. Mikulskas, J. Mickervicius, J. Vaitkus, R. Tomasiunas, V. Grigaliunas, V. Kopustinskas, and S. Meskinis, "Fabrication of photonic structures by means of interference lithography and reactive ion etching," Appl. Surf. Sci. 186, 599-603 (2002). [CrossRef]
  18. H. H. Solak, C. David, J. Gobrecht, L. Wang, and F. Cerrina, "Multiple-beam interference lithography with electron beam written gratings," J. Vac. Sci. Technol. B 20, 2844-2848 (2002). [CrossRef]
  19. C. W. Chien, J. C. Chen, and J. Y. Lee, "Applying an interferometric exposure model to analyze the influences of process parameters on the linewidth," Appl. Opt. 45, 8278-8287 (2006). [CrossRef] [PubMed]
  20. K. M. Leung and Y. F. Liu, "Large complete bandgap in two-dimensional photonic crystals with elliptic air holes," Phys. Rev. B 60, 10610-10612 (1990).
  21. M. Ho, C. T. Chan, and C. M. Soukoulis, "Existence of a photonic gap in periodic dielectric structures," Phys. Rev. Lett. 65, 3152-3155 (1990). [CrossRef] [PubMed]
  22. S. Johnson and J. Joannopoulos, "Block-iterative frequency-domain methods for Maxwell's equations in a planewave basis," Opt. Express 8, 173-190 (2001). [CrossRef] [PubMed]
  23. X. L. Yang, L. Z. Cai, and Q. Liu, "Theoretical bandgap modeling of two-dimensional triangular photonic crystals formed by interference technique of three noncoplanar beams," Opt. Express 11, 1050-1055 (2003). [CrossRef] [PubMed]
  24. B. A. Mello, I. F. Costa, L. Cescato, and C. R. A. Lima, "Developed profile of holographically exposed photoresist gratings," Appl. Opt. 34, 597-603 (1995). [CrossRef]
  25. A. I. Cabuz, E. Centeno, and D. Cassagne, "Superprism effect in bidimensional rectangular photonic crystal," Appl. Phys. Lett. 84, 2031-2033 (2004). [CrossRef]
  26. J. D. Joannopouls, R. D. Mead, and J. N. Winn, Photonic Crystals (Princeton U. Press, 1995).
  27. O. Toader, T. Y. M. Chan, and S. John, "Photonic bandgap architectures for holographic lithography," Phys. Rev. Lett. 92, 043905-1-043905-4 (2004). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited