OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: James C. Wyant
  • Vol. 47, Iss. 13 — May. 1, 2008
  • pp: C319–C323

Optical properties and residual stress of YbF 3 thin films deposited at different temperatures

Ying Wang, Yue-guang Zhang, Wei-lan Chen, Wei-dong Shen, Xu Liu, and Pei-fu Gu  »View Author Affiliations


Applied Optics, Vol. 47, Issue 13, pp. C319-C323 (2008)
http://dx.doi.org/10.1364/AO.47.00C319


View Full Text Article

Enhanced HTML    Acrobat PDF (5929 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

The influence of deposition temperature on the optical properties, microstructure, and residual stress of YbF 3 films, deposited by electron-beam evaporation, has been investigated. The increased refractive indices and surface roughness of YbF 3 films indicate that the film density and columnar structure size increase with deposition temperature. At the same time, higher packing density reduces absorption of moisture. The residual stress is related to deposition temperature and to substrate. For the samples deposited on BK7, the residual stress mainly comes from intrinsic stress, however, for those on fused silica, thermal stress is the dominant factor of total residual stress.

© 2008 Optical Society of America

OCIS Codes
(310.0310) Thin films : Thin films
(310.3840) Thin films : Materials and process characterization
(310.6860) Thin films : Thin films, optical properties

History
Original Manuscript: July 30, 2007
Revised Manuscript: January 13, 2008
Manuscript Accepted: January 15, 2008
Published: March 21, 2008

Citation
Ying Wang, Yue-guang Zhang, Wei-lan Chen, Wei-dong Shen, Xu Liu, and Pei-fu Gu, "Optical properties and residual stress of YbF3 thin films deposited at different temperatures," Appl. Opt. 47, C319-C323 (2008)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-47-13-C319


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. C. M. Stickley, M. E. Filipkowski, E. Parra, and E. E. Hach III, “Future of high efficiency diode lasers,” Proc. SPIE 5991, 599110 (2006).
  2. S. Xiong and Y. Zhang, “Optical coatings for deuterium fluoride chemical laser systems,” Appl. Opt. 36, 4958-4961(1997). [CrossRef] [PubMed]
  3. M. Zhan, Y. Zhao, G. Tian, H. He, J. Shao, and Z. Fan, “Stress, absorptance and laser-induced damage threshold properties of 355-nm HR coatings,” Appl. Phys. B 80, 1007-1010 (2005). [CrossRef]
  4. F. Lemarquis, G. Marchand, and C. Amra, “Design and manufacture of low-absorption ZnS-YF3 antireflection coatings in the 3.516 μm spectral range,” Appl. Opt. 37, 4239-4244(1998). [CrossRef]
  5. R. Thielsch, A. Gatto, and N. Kaiser, “Mechanical stress and thermal-elastic properties of oxide coatings for use in the deep-ultraviolet spectral region,” Appl. Opt. 41, 3211-3217(2002). [CrossRef] [PubMed]
  6. E. H. Hirsch, “Stress in porous thin films through adsorption of polar molecules,” J. Phys. D 13, 2081-2094 (1980). [CrossRef]
  7. J. C. Manifacier, J. Gasiot, and J. P. Fillard, “A simple method for the determination of the optical constants n, k, and the thickness of a weakly absorbing thin film,” J. Phys. E 9, 1002-1004 (1976). [CrossRef]
  8. A. Schnellbügel, B. Selle, and R. Anton, “Determination of the stoichiometry and the Yb2+/Yb3+ ratio in YbFx optical IAD films by RBS and in situ XPS analysis,” Mikrochim. Acta 125, 239-243 (1997). [CrossRef]
  9. H.-C. Chen, C.-C. Lee, C.-C. Jaing, M.-H. Shiao, C.-J. Lu, and F.-S. Shieu, “Effects of temperature on columnar microstructure and recrystallization of TiO2 film produced by ion-assisted deposition,” Appl. Opt. 45, 1979-1984 (2006). [CrossRef] [PubMed]
  10. S. Ben Amor, L. Guedri, G. Baud, M. Jacquet, and M. Ghedira, “Influence of the temperature on the properties of sputtered titanium oxide films,” Mater. Chem. Phys. 77, 903-911 (2003). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited