OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: James C. Wyant
  • Vol. 47, Iss. 18 — Jun. 20, 2008
  • pp: 3269–3274

Digital holographic interferometry for simultaneous orthogonal radial vibration measurements along rotating shafts

Kourosh Tatar, Per Gren, and Henrik Lycksam  »View Author Affiliations


Applied Optics, Vol. 47, Issue 18, pp. 3269-3274 (2008)
http://dx.doi.org/10.1364/AO.47.003269


View Full Text Article

Enhanced HTML    Acrobat PDF (1014 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A digital holographic interferometry setup used to measure radial vibrations along a rotating shaft is presented. A continuous Nd:YAG laser and a high-speed digital camera are used for recording the holograms. The shaft was polished optically smooth to avoid speckle noise from the rotating surface. The light reflected from the shaft was directed onto a diffuser which in turn was imaged by the holographic system. Simultaneous measurements with a laser vibrometer were performed at one point and comparisons between the signals showed good agreement. It is shown that different vibration components of a rotating shaft can be simultaneously measured with this technique.

© 2008 Optical Society of America

OCIS Codes
(090.2880) Holography : Holographic interferometry
(120.0120) Instrumentation, measurement, and metrology : Instrumentation, measurement, and metrology
(120.4290) Instrumentation, measurement, and metrology : Nondestructive testing
(120.7280) Instrumentation, measurement, and metrology : Vibration analysis

ToC Category:
Holography

History
Original Manuscript: February 11, 2008
Revised Manuscript: May 9, 2008
Manuscript Accepted: May 26, 2008
Published: June 11, 2008

Citation
Kourosh Tatar, Per Gren, and Henrik Lycksam, "Digital holographic interferometry for simultaneous orthogonal radial vibration measurementsalong rotating shafts," Appl. Opt. 47, 3269-3274 (2008)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-47-18-3269


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. E. Okuyama, N. Nosaka, and J. Aoki, “Radial motion measurement of a high-revolution spindle motor,” Measurement 40, 64-74 (2007). [CrossRef]
  2. A. Albrecht, S. S. Park, Y. Altintas, and G. Pritschow, “High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors,” Int. J. Mach. Tools Manuf. 45, 993-1008 (2005). [CrossRef]
  3. H.-K. Chang, J.-H. Kim, I. H. Kim, D. Y. Jang, and D. C. Han, “In-process surface roughness prediction using displacement signals from spindle motion,” Int. J. Mach. Tools Manuf. 47, 1021-1026 (2007). [CrossRef]
  4. M. Rantatalo, J.-O. Aidanpaa, B. Goransson, and P. Norman, “Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement,' Int. J. Mach. Tools Manuf. 47, 1034-1045 (2007). [CrossRef]
  5. O. Bhattacharyya, M. B. Jun, S. G. Kapoor, and R. E. DeVor, “The effects of process faults and misalignments on the cutting force system and hole quality in reaming,” Int. J. Mach. Tools Manuf. 46, 1281-1290 (2006). [CrossRef]
  6. R. P. H. Faassen, N. van de Wouw, J. A. J. Oosterling, and H. Nijmeijer, “Prediction of regenerative chatter by modelling and analysis of high-speed milling,” Int. J. Mach. Tools Manuf. 43, 1437-1446 (2003). [CrossRef]
  7. V. Gagnol, B. C. Bouzgarrou, P. Ray, and C. Barra, “Model-based chatter stability prediction for high-speed spindles,” Int. J. Mach. Tools Manuf. 47, 1176-1186 (2007). [CrossRef]
  8. M. Rantatalo, K. Tatar, and P. Norman, “Laser Doppler vibrometry measurements of a rotating milling machine spindle,” in Eighth International Conference on Vibrations in Rotating Machinery (IMechE Event Publications, 2004), pp. 231-240.
  9. K. Tatar, M. Rantatalo, and P. Gren, “Laser vibrometry measurements of an optically smooth rotating spindle,” Mech. Syst. Signal Process. 21, 1739-1745 (2007). [CrossRef]
  10. K. Tatar and P. Gren, “Measurement of milling tool vibrations during cutting using laser vibrometry,” Int. J. Mach. Tools Manuf. 48, 380-387 (2008). [CrossRef]
  11. S. J. Rothberg and J. R. Bell, “On the application of laser vibrometry to translational and rotational vibration measurements on rotating shafts,” Measurement 35, 201-210 (2004). [CrossRef]
  12. B. Halkon and S. J. Rothberg, “Automatic post-processing of laser vibrometry data for rotor vibration measurements,” in Eighth International Conference on Vibrations in Rotating Machinery (IMechE, 2004), 215-229.
  13. T. Kreis, Holographyc Interferometry: Principles and Methods, 1st ed. (Akademie Verlag, 1996), Vol. 1.
  14. G. Pedrini, W. Osten, and M. E. Gusev, “High-speed digital holographic interferometry for vibration measurement,” Appl. Opt. 45, 3456-3462 (2006). [CrossRef] [PubMed]
  15. Y. Fu, G. Pedrini, and W. Osten, “Vibration measurement by temporal Fourier analyses of a digital hologram sequence,” Appl. Opt. 46, 5719-5727 (2007). [CrossRef] [PubMed]
  16. Y. Fu, R. M. Groves, G. Pedrini, and W. Osten, “Kinematic and deformation parameter measurement by spatiotemporal analysis of an interferogram sequence,” Appl. Opt. 46, 8645-8655 (2007). [CrossRef] [PubMed]
  17. C. M. Vest, Holographic Interferometry (Wiley, 1979).
  18. M. Takeda, H. Ina, and S. Kobayashi, “Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry,” J. Opt. Soc. Am. 72, 156-160 (1982). [CrossRef]
  19. H. O. Saldner, N.-E. Molin, and K. A. Stetson, “Fourier-transform evaluation of phase data in spatially phase-biased TV holograms,” Appl. Opt. 35, 332-336 (1996). [CrossRef] [PubMed]
  20. S. Schedin, “Digital holographic interferometry,” J. Holography Speckle 3, 1-17 (2006). [CrossRef]
  21. C. Perez-Lopez, F. Mendoza Santoyo, G. Pedrini, S. Schedin, and H. J. Tiziani, “Pulsed digital holographic interferometry for dynamic measurement of rotating objects with an optical derotator,” Appl. Opt. 40, 5106-5110 (2001). [CrossRef]
  22. C. Perez-Lopez and F. Mendoza Santoyo, “Rigid body motion removal by derotating digital holograms” Proc. SPIE 4419, 226-230 (2001). [CrossRef]
  23. P. Gren, “Pulsed TV holography combined with digital speckle photography restores lost interference phase,” Appl. Opt. 40, 2304-2309 (2001). [CrossRef]
  24. P. Gren, “Bending wave propagation in rotating objects measured by pulsed TV holography,” Appl. Opt. 41, 7237-7240 (2002). [CrossRef] [PubMed]
  25. G. Pedrini, I. Alexeenko, W. Osten, and U. Schnars, “On-line surveillance of a dynamic process by a moving system based on pulsed digital holographic interferometry,” Appl. Opt. 45, 935-943 (2006). [CrossRef] [PubMed]
  26. E. Kolenović, T. Kreis, C. von Kopylow, and W. Jüptner, “Determination of large-scale out-of-plane displacements in digital Fourier holography,” Appl. Opt. 46, 3118-3125 (2007). [CrossRef] [PubMed]
  27. S. J. Rothberg, J. R. Baker, and N. A. Halliwell, “Laser vibrometry: pseudo-vibration,” J. Sound Vib. 135, 516-522 (1989). [CrossRef]
  28. J. R. Bell and S. J. Rothberg, “Laser vibrometers and contacting transducers, target rotation and six degree-of-freedom vibration: what do we really measure?,” J. Sound Vib. 237, 245-261 (2000). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Supplementary Material


» Media 1: MOV (1878 KB)     

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited