OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: Joseph N. Mait
  • Vol. 48, Iss. 16 — Jun. 1, 2009
  • pp: 3055–3061

Generalized design process for fiber-bend-loss-based edge filters for a wavelength measurement system

Pengfei Wang, Gerald Farrell, and Yuliya Semenova  »View Author Affiliations


Applied Optics, Vol. 48, Issue 16, pp. 3055-3061 (2009)
http://dx.doi.org/10.1364/AO.48.003055


View Full Text Article

Enhanced HTML    Acrobat PDF (512 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We investigate and present a generalized methodology for the design of a fiber-bend-loss-based edge filter, starting with the task of evaluating and selecting suitable fibers and then considering the design of a fiber-bending-loss edge filter. As an example to illustrate the methodology, a Corning SMF28e fiber with a 900 μm diameter is selected and two sample edge filters are designed for experimental verification. The designed edge filters are compact, easy to fabricate, meet target spectral specifications, and show low polarization-dependent loss, confirming the effectiveness of the proposed methodology for fiber- bend-loss-based edge filter design.

© 2009 Optical Society of America

OCIS Codes
(060.2310) Fiber optics and optical communications : Fiber optics
(060.2430) Fiber optics and optical communications : Fibers, single-mode
(120.2440) Instrumentation, measurement, and metrology : Filters

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: January 7, 2009
Revised Manuscript: March 27, 2009
Manuscript Accepted: May 4, 2009
Published: May 22, 2009

Citation
Pengfei Wang, Gerald Farrell, and Yuliya Semenova, "Generalized design process for fiber-bend-loss-based edge filters for a wavelength measurement system," Appl. Opt. 48, 3055-3061 (2009)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-48-16-3055


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. M. T. Wlodarczyk, “Wavelength referencing in single-mode microbend sensors,” Opt. Lett. 12, 741-743 (1987). [CrossRef] [PubMed]
  2. R. C. Gauthier and C. Ross, “Theoretical and experimental considerations for a single-mode fiber-optic bend-type sensor,” Appl. Opt. 36, 6264-6273 (1997). [CrossRef]
  3. S. H. Nam and S. Yin, “High-temperature sensing using whispering gallery mode resonance in bent optical fibers,” IEEE Photon. Technol. Lett. 17, 2391-2393 (2005). [CrossRef]
  4. M. D. Nielsen, N. A. Mortensen, M. Albertsen, J. R. Folkenberg, A. Bjarklev, and D. Bonacinni, “Predicting macrobending loss for large-mode area photonic crystal fibers,” Opt. Express 12, 1775 (2004). [CrossRef] [PubMed]
  5. Q. Wang, G. Farrell, and T. Freir, “Study of transmission response of edge filters employed in wavelength measurements,” Appl. Opt. 44, 7789-7792 (2005). [CrossRef] [PubMed]
  6. Q. Wang, G. Rajan, G. Farrell, P. Wang, Y. Semenova, and T. Freir, “Macrobending fiber loss filter, ratiometric wavelength measurement and application,” Meas. Sci. Technol. 18, 3082-3088 (2007). [CrossRef]
  7. Q. Wang, G. Farrell, T. Freir, G. Rajan, and P. Wang, “Low-cost wavelength measurement based on a macrobending single-mode fiber,” Opt. Lett. 31, 1785-1787 (2006). [CrossRef] [PubMed]
  8. Q. Wang, G. Rajan, P. Wang, and G. Farrell, “Polarization dependence of bend loss for a standard single-mode fiber,” Opt. Express 15, 4909 (2007). [CrossRef] [PubMed]
  9. P. Wang, G. Farrell, Q. Wang, and G. Rajan, “An optimized macrobending fiber based edge filter,” IEEE Photon. Technol. Lett. 19, 1136-1138 (2007). [CrossRef]
  10. Q. Wang, G. Rajan, P. Wang, and G. Farrell, “Resolution investigation of ratiometric wavelength measurement system,” Appl. Opt. 46, 6362-6367 (2007). [CrossRef] [PubMed]
  11. D. Marcuse, “Curvature loss formula for optical fibers,” J. Opt. Soc. Am. 66, 216-220 (1976). [CrossRef]
  12. H. Renner, “Bending losses of coated single-mode fibers: a simple approach,” J. Lightwave Technol. 10, 544-551 (1992). [CrossRef]
  13. L. Faustini and G. Martini, “Bend loss in single-mode fibers,” J. Lightwave Technol. 15, 671-679 (1997). [CrossRef]
  14. Q. Wang, G. Farrell, and T. Freir, “Theoretical and experimental investigations of macro-bend losses for standard single mode fibers,” Opt. Express 13, 4476-4484 (2005). [CrossRef] [PubMed]
  15. R. T. Schermer and J. H. Cole, “Improved bend loss formula verified for optical fiber by simulation and experiment,” IEEE J. Quantum Electron. 43, 899-909 (2007). [CrossRef]
  16. Y. Murakami and H. Tsuchiya, “Bending losses of coated single-mode optical fibers,” IEEE J. Quantum Electron. 14, 495-501 (1978). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited