OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: Joseph N. Mait
  • Vol. 48, Iss. 21 — Jul. 20, 2009
  • pp: 4090–4096

Algorithm for ion beam figuring of low-gradient mirrors

Changjun Jiao, Shengyi Li, and Xuhui Xie  »View Author Affiliations


Applied Optics, Vol. 48, Issue 21, pp. 4090-4096 (2009)
http://dx.doi.org/10.1364/AO.48.004090


View Full Text Article

Enhanced HTML    Acrobat PDF (687 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

Ion beam figuring technology for low-gradient mirrors is discussed. Ion beam figuring is a noncontact machining technique in which a beam of high-energy ions is directed toward a target workpiece to remove material in a predetermined and controlled fashion. Owing to this noncontact mode of material removal, problems associated with tool wear and edge effects, which are common in conventional contact polishing processes, are avoided. Based on the Bayesian principle, an iterative dwell time algorithm for planar mirrors is deduced from the computer-controlled optical surfacing (CCOS) principle. With the properties of the removal function, the shaping process of low-gradient mirrors can be approximated by the linear model for planar mirrors. With these discussions, the error surface figuring technology for low-gradient mirrors with a linear path is set up. With the near-Gaussian property of the removal function, the figuring process with a spiral path can be described by the conventional linear CCOS principle, and a Bayesian-based iterative algorithm can be used to deconvolute the dwell time. Moreover, the selection criterion of the spiral parameter is given. Ion beam figuring technology with a spiral scan path based on these methods can be used to figure mirrors with non-axis-symmetrical errors. Experiments on SiC chemical vapor deposition planar and Zerodur paraboloid samples are made, and the final surface errors are all below 1 / 100 λ .

© 2009 Optical Society of America

OCIS Codes
(220.0220) Optical design and fabrication : Optical design and fabrication
(220.4610) Optical design and fabrication : Optical fabrication
(220.5450) Optical design and fabrication : Polishing

ToC Category:
Optical Design and Fabrication

History
Original Manuscript: February 24, 2009
Revised Manuscript: May 24, 2009
Manuscript Accepted: June 22, 2009
Published: July 10, 2009

Citation
Changjun Jiao, Shengyi Li, and Xuhui Xie, "Algorithm for ion beam figuring of low-gradient mirrors," Appl. Opt. 48, 4090-4096 (2009)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-48-21-4090


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. S. R. Wilson, D. W. Reicher, and J. R. McNeil, “Surface figuring using neutral ion beams,” Proc. SPIE 966, 74-81 (1988).
  2. R. Klaver, “Novel interferometer to measure the figure of strongly aspherical mirrors,” master's thesis (The Netherlands University of Delft, 2001).
  3. K. W. Hylton, C. L. Carnal, J. R. Jackson, and C. M. Egert, “Ion beam milling of silicon carbide optical components,” Proc. SPIE 1994, 16-26 (1994). [CrossRef]
  4. L. N. Allen, J. J. Hannon, and R. M. Wambach, “Final surface error correction of an off-axis aspheric petal by ion figuring,” Proc. SPIE 1543, 190-200 (1992). [CrossRef]
  5. S. R. Wilson and J. R. Mcneil, “Neutral ion beam figuring of large optical surfaces,” Proc. SPIE 818, 320-324 (1987).
  6. L. N. Allen and R. E. Keim. “An ion figuring system for large optic fabrication,” Proc. SPIE 1168, 33-50 (1989).
  7. L. N. Allen, R. E. Keim, and T. S. Lewis. “Surface error correction of a Keck 10 -m telescope primary segment by ion figuring,” Proc. SPIE 1531, 195-204 (1991). [CrossRef]
  8. C. L. Carnal, C. M. Egert, and K. W. Hylton, “Advanced matrix-based algorithm for ion beam milling of optical components,” Proc. SPIE 1752, 54-62 (1992). [CrossRef]
  9. C. J. Jiao, S. Y. Li, X. H. Xie, D. F. Wang, and L. Zhou, “Controllability of removal function in the ion beam figuring process for optics mirrors,” Opt. Technique 34, 651-654(2008), in Chinese.
  10. L. Yang, Advanced Technology of Optics Manufacturing (Science Press, 2001).
  11. R. Molina, J. Nunez, F. Cortijo, and J. Mateos, “Image restoration in astronomy: a Bayesian perspective,” IEEE Signal Process. Lett. 18, 11-29 (2001). [CrossRef]
  12. C. Z. Fang, and D. Y. Xiao, Process Identification (Tsinghua Univ. Press, 1998).
  13. D. Nicolas, B. F. Laure, Z. Christophe, R. Pascal, K. Zvi, O. M. Jean Christophe, and Z. Josiane, “3D microscopy deconvolution using Richardon-Lucy algorithm with total variation regularization,” http://hal.inria.fr/inria-00070726/en.
  14. L. B. Lucy, “An iterative technique for the rectification of observed distribution,” Astron. J. 79, 745-754 (1974). [CrossRef]
  15. W. H. Richardson, “Bayesian-based iterative method of image restoration,” J. Opt. Soc. Am. 62, 55-59 (1972). [CrossRef]
  16. D. C. Dobson and C. R. Vogel, “Convergence of an iterative method for total variation denoising,” SIAM J. Numer. Anal. 34, 1779-1791 (1997). [CrossRef]
  17. L. I. Rudin, S. Osher, and E. Fatemi, “Nonlinear total variation based noise removal algorithms,” Physica D (Amsterdam) 60, 259-268 (1992). [CrossRef]
  18. L. Hocheol and Y. Minyang, “Dwell time algorithm for computer-controlled polishing of small axis-symmetrical aspherical lens mold,” Opt.Eng. 40, 1936-1943 (2001). [CrossRef]
  19. X. Q. Peng, Y. F. Dai, S. Y. Li, and W. W. You, “Dwell time algorithm for MRF of axis-symmetrical aspherical parts,” J. National University Defense Technol. 26 (3), 89-92(2004).
  20. A. Schindler, G. Boehm, T. Haensel, W. Frank, A. Nickel, B. Rauschenbach, and F. Bigl, “Precision optical asphere fabrication by plasma jet chemical etching (PJCE) and ion beam figuring,” Proc. SPIE 4451, 242-248 (2001). [CrossRef]
  21. S. C. Fawcett, T. W. Drueding, and T. G. Bifano, “Neutral ion figuring of chemical vapor deposited SiC,” Opt. Eng. 33, 967-974 (1994). [CrossRef]
  22. T. W. Drueding, T. G. Bifano, and S. C. Fawcett, “Deconvolution algorithm applied to ion figuring,” Vol. 13 of OSA Technical Digest Series (Optical Society of America, 1994), pp. 244-247.

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited