OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: Joseph N. Mait
  • Vol. 50, Iss. 11 — Apr. 10, 2011
  • pp: 1548–1553

Refractive index sensing based on Mach–Zehnder interferometer formed by three cascaded single-mode fiber tapers

Di Wu, Tao Zhu, Ming Deng, De-Wen Duan, Lei-Lei Shi, Jun Yao, and Yun-Jiang Rao  »View Author Affiliations


Applied Optics, Vol. 50, Issue 11, pp. 1548-1553 (2011)
http://dx.doi.org/10.1364/AO.50.001548


View Full Text Article

Enhanced HTML    Acrobat PDF (529 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We report a highly sensitive refractive index (RI) sensor based on three cascaded single-mode fiber tapers, in which a weak taper is sandwiched between the two tapers to improve the sensitivity of the sensor. Experimental results show that the sensitivity of the device is 0.286 nm for a 0.01 RI change, which is about four times higher than that of the normal two-cascaded-taper-based Mach–Zehnder interferometer. In addition, the sensitivity of the device could be enhanced by tapering a longer and thinner middle weak taper. Such kinds of low-cost and highly sensitive fiber-optic RI sensors would find applications in chemical or biochemical sensing fields.

© 2011 Optical Society of America

OCIS Codes
(060.2300) Fiber optics and optical communications : Fiber measurements
(060.2430) Fiber optics and optical communications : Fibers, single-mode
(120.3180) Instrumentation, measurement, and metrology : Interferometry
(280.5715) Remote sensing and sensors : Refractivity profiles

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: November 11, 2010
Revised Manuscript: February 10, 2011
Manuscript Accepted: February 10, 2011
Published: April 4, 2011

Virtual Issues
Vol. 6, Iss. 5 Virtual Journal for Biomedical Optics

Citation
Di Wu, Tao Zhu, Ming Deng, De-Wen Duan, Lei-Lei Shi, Jun Yao, and Yun-Jiang Rao, "Refractive index sensing based on Mach–Zehnder interferometer formed by three cascaded single-mode fiber tapers," Appl. Opt. 50, 1548-1553 (2011)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-50-11-1548


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. L. Y. Shao, A. P. Zhang, W. S. Liu, H. Y. Fu, and S. He, “Optical refractive-index sensor based on dual fiber-Bragg gratings interposed with a multimode-fiber taper,” IEEE Photonics Technol. Lett. 19, 30–32 (2007). [CrossRef]
  2. A. Iadicicco, A. Cusano, A. Cutolo, R. Bernini, and M. Giordano, “Thinned fiber Bragg gratings as high sensitivity refractive index sensor,” IEEE Photonics Technol. Lett. 16, 1149–1151 (2004). [CrossRef]
  3. G. Laffout and P. Ferdinand, “Tilted short-period fibre-Bragg-grating induced coupling to cladding modes for accurate refractometry,” Meas. Sci. Technol. 12, 765–770 (2001). [CrossRef]
  4. X. Shu, B. A. L. Gwandu, Y. Liu, L. Zhang, and I. Bennion, “Sampled fiber Bragg grating for simultaneous refractive-index and temperature measurement,” Opt. Lett. 26, 774–776(2001). [CrossRef]
  5. H. J. Patrick, A. D. Kersey, and F. Bucholtz, “Analysis of the response of long period fiber gratings to external index of refraction,” J. Lightwave Technol. 16, 1606–1612 (1998). [CrossRef]
  6. T. Zhu, Y. J. Rao, and Q. J. Mo, “Simultaneous measurement of refractive index and temperature using a single ultralong-period fiber grating,” IEEE Photonics Technol. Lett. 17, 744 (2005). [CrossRef]
  7. T. Allsop, R. Reeves, D. J. Webb, I. Bennion, and R. Neal, “A high sensitivity refractometer based upon a long period grating Mach–Zehnder interferometer,” Rev. Sci. Instrum. 73, 1702–1705 (2002). [CrossRef]
  8. J. F. Ding, A. P. Zhang, L. Y. Shao, J. H. Yan, and S. He, “Fiber-taper seeded long-period grating pair as a highly sensitive refractive-index sensor,” IEEE Photonics Technol. Lett. 17, 1247–1249 (2005). [CrossRef]
  9. J. Villatoro and D. M. Hernandez, “Low-cost optical fiber refractive index sensor based on core diameter mismatch,” J. Lightwave Technol. 24, 1409–1413 (2006). [CrossRef]
  10. Z. Tian, S. S.-H. Yam, J. Barnes, W. Bock, P. Greig, J. M. Fraser, H.-P. Loock, and R. D. Oleschuk, “Refractive index sensing with Mach–Zehnder interferometer based on concatenating two single mode fiber tapers,” IEEE Photonics Technol. Lett. 20, 626–628 (2008). [CrossRef]
  11. J. Villatoro, D. Monzon-Hernandez, and D. Talavera, “High resolution refractive index sensing with cladding multimode tapered optical fiber,” Electron. Lett. 40, 106–107 (2004). [CrossRef]
  12. T. Wei, X. Lan, and H. Xiao, “Fiber inline core-cladding-mode Mach–Zehnder interferometer fabricated by two-point CO2 laser irradiations,” IEEE Photonics Technol. Lett. 21, 669–671(2009). [CrossRef]
  13. P. L. Swart, “Long-period grating Michelson refractometric sensor,” Meas. Sci. Technol. 15, 1576–1580 (2004). [CrossRef]
  14. Z. Tian, S. S.-H. Yam, and H.-P. Loock, “Refractive index sensor based on an abrupt taper Michelson interferometer in a single-mode fiber,” Opt. Lett. 33, 1105–1107 (2008). [CrossRef] [PubMed]
  15. Z. Tian, S. S.-H. Yam, and H.-P. Loock, “Single-mode fiber refractive index sensor based on core-offset attenuators,” IEEE Photonics Technol. Lett. 20, 1387–1389 (2008). [CrossRef]
  16. Y. Wang, M. Yang, D. N. Wang, S. Liu, and P. Lu, “Fiber in-line Mach–Zehnder interferometer fabricated by femtosecond laser micromachining for refractive index measurement with high sensitivity,” J. Opt. Soc. Am. B 27, 370–374 (2010). [CrossRef]
  17. R. Jha, J. Villatoro, G. Badenes, and V. Pruneri, “Refractometry based on a photonic crystal fiber interferometer,” Opt. Lett. 34, 617–619 (2009). [CrossRef] [PubMed]
  18. L. Fan, W. Jiang, S. Feng, R. Zhao, S. Zheng, H. Li, L. Pei, and S. Jian, “Comb-filter based on in-fiber Mach–Zehnder interferometer using a twin-core fiber,” in 2010 Symposium on Photonics and Optoelectronic (SOPO) (IEEE, 2010), pp. 1–4. [CrossRef]
  19. F. Pang, H. Liu, N. Chen, Y. Liu, X. Zeng, Z. Chen, and T. Wang, “Cladding-mode resonance of a double-cladding fiber at a near modal cut-off wavelength for RI sensing,” Meas. Sci. Technol. 21, 094028 (2010). [CrossRef]
  20. J. D. Love, W. M. Henry, W. J. Stewart, R. J. Black, S. Lacroix, and F. Gonthier, “Tapered single-mode fibres and devices. Part 1. Adiabaticity criteria,” IEE Proc. J 138, 343–354(1991). [CrossRef]
  21. H. Y. Choi, M. J. Kim, and B. H. Lee, “All-fiber Mach–Zehnder type interferometers formed in photonic crystal fiber,” Opt. Express 15, 5711–5720 (2007). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited