Abstract

A grating-based shearing interferometeric setup for slope measurement of bent plates has been proposed. The specimen under test is illuminated by a collimated beam from the laser. Light reflected from the specimen passes through two identical holographic gratings placed in tandem. The grating frequency has been so chosen that the diffracted orders from each grating are separated out distinctly. Two first-order beams diffracted from each of the gratings superpose in space. In the resulting interferogram, the fringes due to slope information of the object are visualized. Mathematical formulation for experimental determination of slope values has been undertaken. Validation of the experimental results with theoretical predictions in case of cantilever beam provides good correlation. The main advantage of the technique has been the realization of very compact geometry without the need for spatial filtering arrangement commonly associated with the grating-based techniques used to date.

© 2011 Optical Society of America

Real-time slope mapping and defect detection in bent plates using Talbot interferometry

Satya Prakash Trivedi, Shashi Prakash, Santosh Rana, and Osami Sasaki
Appl. Opt. 49(5) 897-903 (2010)

Recording slope and curvature contours of flexed plates using a grating shearing interferometer

A. Assa, A. A. Betser, and J. Politch
Appl. Opt. 16(9) 2504-2513 (1977)

Phase-shifting lateral shearing interferometry using wedge-plate and interferometric grating

Reena Disawal, Jitendra Dhanotia, and Shashi Prakash
Appl. Opt. 53(31) 7534-7539 (2014)

Measurement of longitudinal displacement using lateral shearing cyclic path optical configuration setup and phase shifting interferometry

Y. Pavan Kumar and Sanjib Chatterjee
Appl. Opt. 50(10) 1350-1355 (2011)

Simultaneous measurement of slope and curvature with a three-aperture speckle shearing interferometer

D. K. Sharma, R. S. Sirohi, and M. P. Kothiyal
Appl. Opt. 23(10) 1542-1546 (1984)