OSA's Digital Library

Applied Optics

Applied Optics


  • Editor: Joseph N. Mait
  • Vol. 51, Iss. 35 — Dec. 10, 2012
  • pp: 8315–8323

Polydimethylsiloxane coating on an ionic polymer metallic composite for a tunable focusing mirror

Shih-An Tsai, Hsiang-Chun Wei, and Guo-Dung J. Su  »View Author Affiliations

Applied Optics, Vol. 51, Issue 35, pp. 8315-8323 (2012)

View Full Text Article

Enhanced HTML    Acrobat PDF (1166 KB)

Browse Journals / Lookup Meetings

Browse by Journal and Year


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools



An ionic polymer metallic composite (IPMC) can perform a bending deformation under an electric field by a small bias voltage. A roughening process is necessary and typically included in the IPMC fabrication. Roughening processes bring several advantages, including better metal adhesion and actuation performance. However, the resulting large surface roughness is an obstacle for optical applications. In this paper, we coated polydimethylsiloxane to improve the surface roughness of IPMC. The improved surface roughness is around 28 nm versus tens of micrometers with an uncoated IPMC. The surface-improved IPMC achieved focusing power of 77 diopters under a 7 V bias voltage. We also found that the lifetime in atmosphere is 30 times longer than that of the nonimproved IPMC. Compared with other popular focusing techniques, such as liquid lenses or micromachined deformable mirrors, the driving voltage is at least one order of magnitude lower and the tunable range is two to three times larger. The effects of the surface-improved fabrication on reflectance, surface scattering, and actuation performance are also discussed. We demonstrate the surface-improved method to construct a patterned IPMC deformable membrane for optical applications.

© 2012 Optical Society of America

OCIS Codes
(230.4040) Optical devices : Mirrors
(110.1080) Imaging systems : Active or adaptive optics
(220.1080) Optical design and fabrication : Active or adaptive optics

ToC Category:
Optical Devices

Original Manuscript: September 5, 2012
Revised Manuscript: October 25, 2012
Manuscript Accepted: October 25, 2012
Published: December 4, 2012

Shih-An Tsai, Hsiang-Chun Wei, and Guo-Dung J. Su, "Polydimethylsiloxane coating on an ionic polymer metallic composite for a tunable focusing mirror," Appl. Opt. 51, 8315-8323 (2012)

Sort:  Author  |  Year  |  Journal  |  Reset  


  1. S. Kuiper and B. H. W. Hendriks, “Variable-focus liquid lens for miniature cameras,” Appl. Phys. Lett. 85, 1128–1130 (2004). [CrossRef]
  2. B. Berge, “Liquid lens technology: principle of electrowetting based lenses and applications to imaging,” in Proceedings of IEEE Conference on Micro Electro Mechanical Systems (IEEE, 2005), pp. 227–230.
  3. L. J. Hornbeck, “128×128 deformable mirror device,” IEEE Trans. Electron Devices 30, 539–545 (1983). [CrossRef]
  4. M. Séchaud, “Wave-front compensation devices,” in Adaptive Optics in Astronomy, F. Roddier, ed. (Academic, 1999), pp. 57–91.
  5. G.-D. J. Su, Y. Yeh, C. Chiu, C. Li, and T. Chen, “Fabrication and measurement of low-stress polyimide membrane for high-resolution variable optical attenuator,” IEEE J. Sel. Top. Quantum Electron. 13, 312–315 (2007). [CrossRef]
  6. J. Wang, T. Chen, Y. Chien, and G. Su, “Miniature optical autofocus camera by micromachined fluoro-polymer deformable mirror,” Opt. Express 17, 6268–6274 (2009). [CrossRef]
  7. M. Shahinpoor and K. J. Kim, “The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles,” Smart Mater. Struct. 9, 543–551 (2000). [CrossRef]
  8. M. Shahinpoor, Y. Bar-Cohen, J. O. Simpson, and J. Smith, “Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles—a review,” Smart Mater. Struct. 7, R15–R30 (1998). [CrossRef]
  9. B. Bhandari, G. Y. Lee, and S. H. Ahn, “A review on IPMC material as actuators and sensors: fabrications, characteristics and applications,” Int. J. Precis. Eng. Man. 13, 141–163 (2012). [CrossRef]
  10. K. Onishi, S. Sewa, K. Asaka, N. Fujiwara, and K. Oguro, “Bending response of polymer electrolyte actuator,” Proc. SPIE 3987, 121–128 (2000). [CrossRef]
  11. K. J. Kim and M. Shahinpoor, “Ionic polymer-metal composites: II. Manufacturing techniques,” Smart Mater. Struct. 12, 65–79 (2003). [CrossRef]
  12. C. K. Chung, P. K. Fung, Y. Z. Hong, M. S. Ju, C. C. K. Lin, and T. C. Wu, “A novel fabrication of ionic polymer-metal composites (IPMC) actuator with silver nano-powders,” Sens. Actuators B 117, 367–375 (2006). [CrossRef]
  13. B. L. Stoimenov, J. M. Rossitera, and T. Mukaia, “Anisotropic surface roughness enhances bending response of ionic polymer-metal composite (IPMC) artificial muscles,” Proc. SPIE 6413, 641302 (2006). [CrossRef]
  14. H.-C. Wei and G.-D. J. Su, “A large-stroke deformable mirror by gear shaped IPMC design,” in Proceedings of IEEE Conference on Nano/Micro Engineered and Molecular Systems (IEEE, 2011), pp. 113–116.
  15. H. Hsieh, H. Wei, M. Lin, W. Hsu, Y. Cheng, and G.-D. J. Su, “Thin autofocus camera module by a large-stroke micromachined deformable mirror,” Opt. Express 18, 11097–11104 (2010). [CrossRef]
  16. H. Ren, D. W. Fox, B. Wu, and S. T. Wu, “Liquid crystal lens with large focal length tunability and low operating voltage,” Opt. Express 15, 11328–11335 (2007). [CrossRef]
  17. C. C. Yeh and W. P. Shih, “Effects of water content on the actuation performance of ionic polymer-metal composites,” Smart Mater. Struct. 19, 124007 (2010). [CrossRef]
  18. J. Lee, J. H. Lee, J. Nam, H. Choi, K. Jung, J. Jeon, Y. Lee, K. Kim, and Y. Tak, “Water uptake and migration effects of electroactive ion-exchange polymer metal composite (IPMC) actuator,” Sens. Actuators A 118, 98–106 (2005). [CrossRef]
  19. L. Feng, Y. Joanne, Y. Marcus, K. Wai, and N. Pui, “Effect of thickness and length of ion polymer metal composites (IPMC) on its actuation properties,” Adv. Mater. Res. 197–198, 401–404 (2011). [CrossRef]
  20. M. Bennett, “Ionic liquids as stable solvents for ionic polymer transducers,” Sens. Actuators A 115, 79–90 (2004). [CrossRef]
  21. M. Shahinpoor and K. J. Kim, “The effect of surfaceelectrode resistance on the performance of ionic polymermetal composite (IPMC) artificial muscles,” Smart Mater. Struct. 9, 543–551 (2000). [CrossRef]
  22. J. Barramba, J. Silva, and P. Costabranco, “Evaluation of dielectric gel coating for encapsulation of ionic polymer-metal composite (IPMC) actuators,” Sens. Actuators A 140, 232–238 (2007). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited