OSA's Digital Library

Applied Optics

Applied Optics

APPLICATIONS-CENTERED RESEARCH IN OPTICS

  • Editor: Joseph N. Mait
  • Vol. 52, Iss. 28 — Oct. 1, 2013
  • pp: 6969–6978

Viewing-zone control of integral imaging display using a directional projection and elemental image resizing method

Md. Ashraful Alam, Mei-Lan Piao, Le Thanh Bang, and Nam Kim  »View Author Affiliations


Applied Optics, Vol. 52, Issue 28, pp. 6969-6978 (2013)
http://dx.doi.org/10.1364/AO.52.006969


View Full Text Article

Enhanced HTML    Acrobat PDF (1660 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

Viewing-zone control of integral imaging (II) displays using a directional projection and elemental image (EI) resizing method is proposed. Directional projection of EIs with the same size of microlens pitch causes an EI mismatch at the EI plane. In this method, EIs are generated computationally using a newly introduced algorithm: the directional elemental image generation and resizing algorithm considering the directional projection geometry of each pixel as well as an EI resizing method to prevent the EI mismatch. Generated EIs are projected as a collimated projection beam with a predefined directional angle, either horizontally or vertically. The proposed II display system allows reconstruction of a 3D image within a predefined viewing zone that is determined by the directional projection angle.

© 2013 Optical Society of America

OCIS Codes
(100.6890) Image processing : Three-dimensional image processing
(110.2990) Imaging systems : Image formation theory
(170.0110) Medical optics and biotechnology : Imaging systems

ToC Category:
Imaging Systems

History
Original Manuscript: July 12, 2013
Revised Manuscript: September 3, 2013
Manuscript Accepted: September 4, 2013
Published: October 1, 2013

Citation
Md. Ashraful Alam, Mei-Lan Piao, Le Thanh Bang, and Nam Kim, "Viewing-zone control of integral imaging display using a directional projection and elemental image resizing method," Appl. Opt. 52, 6969-6978 (2013)
http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-52-28-6969


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. M. G. Lipmann, “Epreuves reversibles donnant la sensation du relief,” J. Phys. 7, 821–825 (1908). [CrossRef]
  2. F. Okano, H. Hoshino, J. Arai, and I. Yuayma, “Real-time pickup method for a three-dimensional image based on integral photography,” Appl. Opt. 36, 1598–1603 (1997). [CrossRef]
  3. Y. Igarishi, H. Murata, and M. Ueda, “3D display system using a computer generated integral photography,” Jpn. J. Appl. Phys. 17, 1683–1684 (1978).
  4. S. Jung, S.-W. Min, J.-H. Park, and B. Lee, “Study of three-dimensional display system based on computer-generated integral photography,” J. Opt. Soc. Korea 5, 43–48 (2001). [CrossRef]
  5. H. Hoshino, F. Isono, and I. Yuyama, “Analysis of resolution limitation of integral photography,” J. Opt. Soc. Am. 15, 2059–2065 (1998). [CrossRef]
  6. J.-H. Park, S.-W. Min, S. Jung, and B. Lee, “Analysis of viewing parameters for two display methods based on integral photography,” Appl. Opt. 40, 5217–5232 (2001). [CrossRef]
  7. J.-H. Park, J. Kim, Y. Kim, and B. Lee, “Resolution-enhanced three-dimension/two-dimension convertible display based on integral imaging,” Opt. Express 13, 1875–1884 (2005). [CrossRef]
  8. M. Yamasaki, H. Sakai, T. Koike, and M. Oikawa, “Full-parallax autostereoscopic display with scalable lateral resolution using overlaid multiple projection,” J. Soc. Inf. Disp. 18, 494–500 (2010). [CrossRef]
  9. J.-H. Park, H.-R. Kim, Y. Kim, J. Kim, J. Hong, S.-D. Lee, and B. Lee, “Depth-enhanced three-dimensional-two-dimensional convertible display based on modified integral imaging,” Opt. Lett. 29, 2734–2736 (2004). [CrossRef]
  10. J.-H. Park, G. Baasantseren, N. Kim, G. Park, J.-M. Kang, and B. Lee, “View image generation in perspective and orthographic projection geometry based on integral imaging,” Opt. Express 16, 8800–8813 (2008). [CrossRef]
  11. G. Park, J.-H. Jung, K. Hong, Y. Kim, Y.-H. Kim, S.-W. Min, and B. Lee, “Multi-viewer tracking integral imaging system and its viewing zone analysis,” Opt. Express 17, 17895–17908 (2009). [CrossRef]
  12. S. Park, B.-S. Song, and S.-W. Min, “Analysis of image visibility in projection-type integral imaging system without diffuser,” J. Opt. Soc. Korea 14, 121–126 (2010). [CrossRef]
  13. M. A. Alam, G. Baasantseren, M.-U. Erdenebat, N. Kim, and J.-H. Park, “Resolution enhancement of integral-imaging three-dimensional display using directional elemental image projection,” J. Soc. Inf. Disp. 20, 221–227 (2012). [CrossRef]
  14. H.-J. Choi, Y. M. Kim, J. Jung, K.-M. Jung, and S.-W. Min, “Tiling integral floating display system with optimized viewing window,” Appl. Opt. 51, 5453–5457 (2012). [CrossRef]
  15. J.-S. Jang and B. Javidi, “Improved viewing resolution of three-dimensional integral imaging by use of nonstationary micro-optics,” Opt. Lett. 27, 324–326 (2002). [CrossRef]
  16. J.-S. Jang, Y.-S. Oh, and B. Javidi, “Spatiotemporally multiplexed integral imaging projector for large-scale high-resolution three dimensional display,” Opt. Express 12, 557–563 (2004). [CrossRef]
  17. A. Stern and B. Javidi, “Three-dimensional image sensing and reconstruction with time-division multiplexed computational integral imaging,” Appl. Opt. 42, 7036–7042 (2003). [CrossRef]
  18. B. Lee, S. Jung, and J.-H. Park, “Viewing-angle-enhanced integral imaging by lens switching,” Opt. Lett. 27, 818–820 (2002). [CrossRef]
  19. Y. Kim, J.-H. Park, S.-W. Min, S. Jung, H. Choi, and B. Lee, “Wide-viewing-angle integral three-dimensional imaging system by curving a screen and a lens array,” Appl. Opt. 44, 546–552 (2005). [CrossRef]
  20. J.-S. Jang and B. Javidi, “Improvement of viewing angle in integral imaging by use of moving lenslet arrays with low fill factor,” Appl. Opt. 42, 1996–2002 (2003). [CrossRef]
  21. J.-S. Jang and B. Javidi, “Three-dimensional projection integral imaging using micro-convex-mirror arrays,” Opt. Express 12, 1077–1083 (2004). [CrossRef]
  22. R. Martinez-Cuenca, H. Navarro, G. Saavedra, B. Javidi, and M. Martínez-Corral, “Enhanced viewing-angle integral imaging by multiple-axis telecentric relay system,” Opt. Express 15, 16255–16260 (2007). [CrossRef]
  23. H. Choi, J.-H. Park, J. Kim, S.-W. Cho, and B. Lee, “Wide-viewing-angle 3D/2D convertible display system using two display devices and a lens array,” Opt. Express 13, 8424–8432 (2005). [CrossRef]
  24. H. Choi, S.-W. Min, S. Jung, J.-H. Park, and B. Lee, “Multiple-viewing-zone integral imaging using a dynamic barrier array for three-dimensional displays,” Opt. Express 11, 927–932 (2003). [CrossRef]
  25. G. Baasantseren, J.-H. Park, K.-C. Kwon, and N. Kim, “Viewing angle enhanced integral imaging display using two elemental image masks,” Opt. Express 17, 14405–14417 (2009). [CrossRef]
  26. M. Shin, G. Baasantseren, K.-C. Kwon, N. Kim, and J.-H. Park, “Three-dimensional display system based on integral imaging with viewing direction control,” Jpn. J. Appl. Phys. 49, 072501 (2010). [CrossRef]
  27. Y. Kim, J. Kim, J.-M. Kang, J.-H. Jung, H. Choi, and B. Lee, “Point light source integral imaging with improved resolution and viewing angle by the use of electrically movable pinhole array,” Opt. Express 15, 18253–18267 (2007). [CrossRef]
  28. G. Li, K.-C. Kwon, G.-H. Shin, J.-S. Jeong, K.-H. Yoo, and N. Kim, “Simplified integral imaging pickup method for real objects using a depth camera,” J. Opt. Soc. Korea 16, 381–385 (2012). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited