Abstract

Thermal lens calorimetry is applied to the measurement of infrared absorption of condensed phase samples. The unique trade offs encountered with longer wavelength lasers in thermal lens measurements are discussed. As a demonstration of the technique, the determination of hydrocarbons using a helium-neon laser operated at 3.39 μm is reported. The minimum detectable sample has an absorbance, <i>A</i> = 5 × 10⁻⁴, corresponding to 8 ng of 2,2,4-trimethylpentane within the beam volume in the sample. Interpretation of absorbance at the helium-neon laser transition is aided by the determination of functional group molar absorptivities from a series of normal, cyclic, and branched-chain hydrocarbons. The average specific absorption coefficient for hydrocarbons at this wavelength is found to be 2.09 (±0.09) 1 g⁻¹ cm⁻¹.

Laser-induced thermal lens effect: a new theoretical model

S. J. Sheldon, L. V. Knight, and J. M. Thorne
Appl. Opt. 21(9) 1663-1669 (1982)

Frequency modulation time delay thermal lens effect spectrometry: a new technique of transient photothermal calorimetry

J. F. Power
Appl. Opt. 29(6) 841-854 (1990)

Enhancement of the thermal lens signal induced by sample matrix absorption of the probe laser beam

Victor I. Grishko, Chieu D. Tran, and Walter W. Duley
Appl. Opt. 41(27) 5814-5822 (2002)

Model for continuous-wave laser-induced thermal lens spectrometry of optically transparent surface-absorbing solids

Dmitry A. Nedosekin, Mikhail A. Proskurnin, and Mikhail Yu. Kononets
Appl. Opt. 44(29) 6296-6306 (2005)

Spectral-absorptance measurements for laser calorimetry*

E. D. West and L. B. Schmidt
J. Opt. Soc. Am. 65(5) 573-578 (1975)