Abstract

Homodyne photothermal spectrometry (HPS) is a very wide bandwidth signal recovery technique which uses many of the elements of lock-in detection at very low cost. The method uses a frequency sweep, with a high-frequency bandwidth of up to 10 MHz, to excite a linear photothermal system. The response sweep of the photothermal system is down-shifted into a bandwidth of a few kilohertz by means of in-phase mixing with the excitation sweep with the use of a four-quadrant double-balanced mixer and a low-pass filter. Under conditions derived from theory, the filter output gives a good approximation to the real part of the photothermal system's frequency response, dispersed as a function of time. From a recording of this signal, the frequency and impulse response of the photothermal system are rapidly recovered at very high resolution. The method has been tested with the use of laser photopyroelectric effect spectrometry and provides an inexpensive, convenient method for the recovery of high-frequency photothermal signals.

Frequency modulation time delay thermal lens effect spectrometry: a new technique of transient photothermal calorimetry

J. F. Power
Appl. Opt. 29(6) 841-854 (1990)

Frequency-modulated impulse response photothermal detection through optical reflectance. 2: Experimental

Joan F. Power and Andreas Mandelis
Appl. Opt. 27(16) 3408-3417 (1988)

Bispectral magnitude and phase recovery using a wide bandwidth acousto-optic processor

Stacy K. Kniffen, Michael F. Becker, and Edward J. Powers
Appl. Opt. 31(8) 1015-1029 (1992)

Rapid pulse shaping with homodyne detection for measuring nonlinear optical signals

Ivan R. Piletic, Martin C. Fischer, Prathyush Samineni, Gunay Yurtsever, and Warren S. Warren
Opt. Lett. 33(13) 1482-1484 (2008)

Self-starting optical–electrical–optical homodyne clock recovery for phase-modulated signals

Ehsan Sooudi, Andrew D. Ellis, and Robert J. Manning
Opt. Lett. 42(17) 3486-3489 (2017)