Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Chinese Optics Letters
  • Vol. 2,
  • Issue 7,
  • pp. 426-427
  • (2004)

Fabrication and characterization of two-dimensional pin-cushion position sensitive detectors

Not Accessible

Your library or personal account may give you access

Abstract

In this paper, the fabrication and testing results of a two-dimensional pin-cushion position sensitive detector (PSD) are presented. The obtained pin-cushion PSD with an 8 * 8 mm2 effective area presents a maximum spectral response of 0.5 mA/mW at 850-nm wavelength, a 12-nA dark current at 5-V reverse voltage, a reverse breakdown voltage of 50 V, a nonlinearity of 2.175%, and a spatial resolution of 10 um. The spatial resolution is relatively low and the slight pin-cushion concave distortion is generated due to the incompletely satisfied relationship between sheet resistivity of the anode and the resistance per unit length.

© 2005 Chinese Optics Letters

PDF Article
More Like This
Gap measurement by position-sensitive detectors

Jung-Ki Kim, Man-Suhk Kim, Jong Han Bae, Jin Hyuk Kwon, Hang-Boo Lee, and Soo-Hoa Jeong
Appl. Opt. 39(16) 2584-2591 (2000)

Fourier synthesis image reconstruction by use of one-dimensional position-sensitive detectors

Jun′ichi Kotoku, Kazuo Makishima, Yuu Okada, Hitoshi Negoro, Yukikatsu Terada, Hidehiro Kaneda, and Minoru Oda
Appl. Opt. 42(20) 4176-4185 (2003)

Cylinder gauge measurement using a position sensitive detector

W. Doyle St. John
Appl. Opt. 46(30) 7469-7474 (2007)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved