New Pixel Circuit Design Employing an Additional Pixel Line Insertion in AMOLED Displays Composed by Excimer Laser-Crystallized TFTs
Journal of Display Technology, Vol. 8, Issue 8, pp. 479-482 (2012)
Acrobat PDF (774 KB)
Abstract
Active matrix organic light-emitting diode (AMOLED) displays are fabricated from polycrystalline silicon, which is formed in the single and double (overlap) scanned area during the excimer laser annealing (ELA) process. A redundant pixel line (RPL) design is proposed to remove the overlapping mura and, as a result, a 5-in AMOLED display is successfully fabricated without any non-uniform line image on the overlapping scanned area. This result indicates that the fabrication of a large-sized AMOLED panel is possible using ELA crystallization through an RPL design.
© 2012 IEEE
Citation
Guanghai Jin, Sangmoo Choi, Moojin Kim, Sungchul Kim, and Jonghyun Song, "New Pixel Circuit Design Employing an Additional Pixel Line Insertion in AMOLED Displays Composed by Excimer Laser-Crystallized TFTs," J. Display Technol. 8, 479-482 (2012)
http://www.opticsinfobase.org/jdt/abstract.cfm?URI=jdt-8-8-479
You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
« Previous Article | Next Article »
OSA is a member of 