OSA's Digital Library

Journal of Display Technology

Journal of Display Technology

| A JOINT IEEE/OSA PUBLICATION

  • Vol. 9, Iss. 8 — Aug. 1, 2013
  • pp: 673–677

Finite Element Analysis of Ring-on-Ring Test on LCD Panels

K. Hemanth Vepakomma, Jamie Westbrook, Stephen Carley, and Jum Kim

Journal of Display Technology, Vol. 9, Issue 8, pp. 673-677 (2013)


View Full Text Article

Acrobat PDF (556 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations
  • Export Citation/Save Click for help

Abstract

The ring-on-ring test is one of the most popular surface strength testing methods used to test LCD panels. This paper uses finite element analysis to show that a panel behaves like two independent pieces of glass during a ring-on-ring test. The epoxy region where the color filter and thin-film transistor (TFT) glasses are glued together does not affect the stress at the center. As LCD panels get thinner, the contribution of membrane stress increases significantly. Because the color filter and TFT glasses act independently, they experience maximum principal stresses within 15% of each other. For deflections greater than one-half (sometimes one-fourth) the glass thickness, the stresses are not uniform inside the load ring, requiring finite element analysis to obtain an accurate stress distribution.

© 2013 IEEE

Citation
K. Hemanth Vepakomma, Jamie Westbrook, Stephen Carley, and Jum Kim, "Finite Element Analysis of Ring-on-Ring Test on LCD Panels," J. Display Technol. 9, 673-677 (2013)
http://www.opticsinfobase.org/jdt/abstract.cfm?URI=jdt-9-8-673


Sort:  Year  |  Journal  |  Reset

References

  1. S. T. Gulati, J. D. Helfinstine, "Edge strength testing of thin glasses," Int. J. Appl. Glass Sci. 2, 39-46 (2011).
  2. R. Huet, W. Ming, "LCD display strength: Why edge preparation matters," 2007 Int. Conf. on Portable Inf. Devices pp. 1-4.
  3. S. T. Gulati, J. Westbrook, S. Carley, H. Vepakomma, T. Ono, "Two point bending of thin glass substrate," SID Symp. Dig. Tech. Papers (2011) pp. 652-654.
  4. ASTM“Standard test method for monotonic equibiaxial flexural strength of advanced ceramics at ambient temperature,” (2009).
  5. S. T. Gulati, J. T. Westbrook, K. H. Vepakomma, T. Ono, J. S. Kim, "Overview of strength tests for LCD substrates and panels," Int. Display Workshops (2011).
  6. S. H. Chae, J. H. Zhao, D. R. Edwards, P. S. Ho, "Verification of ball-on-ring test using finite element analysis," 2010 12th IEEE Intersoc. Conf. on Thermal Thermomech.Phenomena in Electron. Syst. (ITherm) pp. 1-6.
  7. T. Fett, G. Rizzi, E. Ernst, R. Müller, R. Oberacker, "A 3-balls-on-3-balls strength test for ceramic disks," J. Eur. Ceramic Soc. 27, 1-12 (2007).
  8. G. de With, H. H. M. Wagemans, "Ball-on-ring test revisited," J. Amer. Ceramic Soc. 72, 1538-1541 (1989).
  9. S. T. Gulati, J. D. Helfinstine, T. A. Roe, M. L. Hillman, J. C. Lapp, "Biaxial strength of ultrathin AMLCD glass substrates," SID Symp. Dig. Tech. Papers (2002) pp. 49-51.
  10. A. Simpatico, W. R. Cannon, M. J. Matthewson, "Comparison of hydraulic-burst and ball-on-ring tests for measuring biaxial strength," J. Amer. Ceramic Soc. 82, 2737-2744 (1999).
  11. X. Nie, W. W. Chen, D. W. Templeton, "Dynamic ring-on-ring equibiaxial flexural strength of borosilicate glass," Int. J. Appl. Ceramic Technol. 7, 616-624 (2010).
  12. A. K. D. A. Seal, M. Banerjee, A. K. Mukhopadhyay, K. K. Phani, "Mechanical properties of very thin cover slip glass disk," Bull. Mater. Sci. 24, 151-155 (2001).
  13. T. Fett, G. Rizzi, J. P. Guin, S. M. Wiederhorn, "Ring-on-ring strength measurements on rectangular glass slides," J. Mater. Sci. 42, 393-395 (2007).
  14. G. Pe?anac, T. Bause, J. Malzbender, "Ring-on-ring testing of thin, curved bi-layered materials," J. Eur. Ceramic Soc. 31, 2037-2042 (2011) 10/15/.
  15. C. H. Hsueh, M. J. Lance, M. K. Ferber, "Stress distributions in thin bilayer discs subjected to ball-on-ring tests," J. Amer. Ceramic Soc. 88, 1687-1690 (2005).
  16. A. Börger, P. Supancic, R. Danzer, "The ball on three balls test for strength testing of brittle discs: Stress distribution in the disc," J. Eur. Ceramic Soc. 22, 1425-1436 (2002).
  17. J. D. Helfinstine, S. T. Gulati, J. F. Bayne, W. R. Powell, J. C. Lapp, "Mechanical reliability of LCD panels under dynamic loading," SID Symp. Dig. Tech. Papers (2004) pp. 1597-1599.
  18. C. Soon-Wan, J. Jae-Woo, O. Seunghee, M. Young-Jun, B. In-Youl, H. Dong-Sool, "Drop reliability of glass panel for LCD," 2011 61st IEEE Electron. Compon. Technol. Conf. (ECTC) pp. 1250-1254.
  19. K. H. Vepakomma, S. Carley, J. Kim, "Finite element analysis of ball drop on LCD panels," SID Symp. Dig. Tech. Papers (2012) pp. 675-678.
  20. M.-C. Pan, P.-C. Chen, "Drop simulation/experimental verification and shock resistance improvement of TFT-LCD monitors," Microelectron. Rel. 47, 2249-2259 (2007) 12//.
  21. A. A. Griffith, "The phenomena of rupture and flow in solids," Phil. Trans. Royal Soc. Lond. A, containing papers of a mathematical or physical character221, 163-198 (1921).
  22. C. Phillips, "The strength and weakness of brittle materials," Amer. Scientist 20-51 (1965).
  23. S. T. Gulati, J. D. Helfinstine, J. F. Bayne, W. R. Powell, J. C. Lapp, "Mechanical reliability of LCD panels under static loading," SID Symp. Dig. Tech. Papers (2004) pp. 1593-1595.
  24. D. M. M. a. M. E. M. L. P. J. E. Gordon, "On the strength and structure of glass," Proc. Royal Soc. Lond. A 249, 65-72 (1959).
  25. W. A. Dalgliesh, D. A. Taylor, "The strength and testing of window glass," Can. J. Civil Eng. 17, 752-762 (1990).
  26. K. H. Vepakomma, J. Westbrook, S. Carley, J. Kim, "Finite element analysis of four point bending of LCD panels," J. Display Technol. 9, 82-86 (2013).
  27. J. T. Westbrook, J. F. Bayne, S. H. Carley, K. H. Vepakomma, J. S. Kim, S. T. Gulati, "Four point bending of AMLCD panel," SID Symp. Dig. Tech. Papers (2012) pp. 996-997.
  28. J. T. Westbrook, J. F. Bayne, T. A. Roe, J. S. Kim, P.-H. Su, T. Ono, "Strength measurements of thin AMLCD panels," SID Symp. Dig. Tech. Papers (2010) pp. 1073-1076.
  29. G. P. Toshihiko Ono, S. T. Gulati, "A simple correction to thin panel strength value as calculated from 4-point bend test," Int. Display Workshops (IDW) .
  30. S. T. Gulati, J. D. Helfinstine, T. Ono, J. C. Lapp, "Behavior of LCD panel during bending," SID Symp. Dig. Tech. Papers (2007) pp. 1508-1511.
  31. M.-H. Lin, C.-H. Hsieh, K.-F. Huang, "Strength of LCD panel during bending," SID Symp. Dig. Tech. Papers (2010) pp. 1069-1072.
  32. S. Garner, G. Merz, G. S. Glaesemann, J. Tosch, C. Chang, D. Marshall, "Ultra-slim flexible glass substrates for display applications," SID Symp. Dig. Tech. Papers (2012) pp. 342-344.
  33. M. Inoue, Y. Takizawa, A. Okada, "Non-linear flexure testing of a high-strength glass disk," Int. J. Solids Structures 28, 1185-1197 (1991).
  34. ANSYS User's Manual 14.0 ANSYS, Inc.CanonsburgPAUSA (2011).
  35. R. Behr, J. Minor, M. Linden, C. Vallabhan, "Laminated glass units under uniform lateral pressure," J. Struct. Eng. 111, 1037-1050 (1985).
  36. C. Vallabhan, J. Minor, S. Nagalla, "Stresses in layered glass units and monolithic glass plates," J. Struct. Eng. 113, 36-43 (1987).
  37. A. P. Boresi, R. J. Schmidt, Advanced Mechanics of Materials (Wiley, 1985).
  38. S. T. Gulati, J. F. Bayne, W. R. Powell, J. D. Helfinstine, "Mirror constant for AMLCD glass," Amer. Ceramic Soc. Bull. 83, 14-15 (2004).

Cited By

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited