Abstract
Two-dimensional (2-D) polymeric multimode waveguide arrays with two reflection-mirrors have been fabricated for optical interconnects between 2-D arrayed vertical-cavity surface-emitting lasers and detectors. Contact printing lithography was adopted for simple and low-cost process using ultraviolet-curable epoxy-based polymers. Fabricated waveguides were diced of the same size and stacked one by one with lateral positional errors less than ±20 µm . Two kinds of mirrors were fabricated: single-reflection mirror and double-reflection mirror. Double-reflected mirrors resulted in lower losses with 1.2 dB than single reflected mirrors with 2.1 dB. The average insertion losses of 16-channel arrayed waveguides with two single-reflection mirrors and with two double-reflection-mirrors were measured to be 6.1 and 4.4 dB for 6-cm-long waveguides at a wavelength of 830 nm, respectively. The crosstalk between the waveguides was less than -25 dB. The characteristics of the waveguide arrays are good enough for applications to optical interconnects.
© 2004 IEEE
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription