Abstract

Today, the number of services, which includes large information contents like high-definition movies, is rapidly increasing. The graded-index plastic optical fiber (GI-POF) has been proposed as a solution. The conventional fabrication method of GI-POF, however, is unsuitable for mass production. Therefore, we propose the dopant diffusion coextrusion process for fabricating high-bandwidth GI-POF. It has been generally thought that formation mechanism of refractive-index distribution in optical polymer materials by this process would be a Fick's diffusion with constant diffusion coefficient and, therefore, has a tailing part at the core–cladding boundary. Contrary to predictions, we succeed in fabricating GI-POF with an almost optimum-index distribution. It is made evident by experiments and simulation that the formation mechanism of GI-POF by this process is a Fick's diffusion with diffusion coefficient dependent on dopant concentration. These results indicate high possibility of fabrication of high-bandwidth fibers of a polymethyl methacrylate–diphenyl sulfide system by the dopant diffusion coextrusion process.

© 2007 IEEE

Graded-index plastic optical fiber prepared by the coextrusion process

Ryoma Hirose, Makoto Asai, Atsushi Kondo, and Yasuhiro Koike
Appl. Opt. 47(22) 4177-4185 (2008)

Bandwidth enhancement of graded index plastic optical fiber by control of 
differential mode attenuation

Takafumi Noda and Yasuhiro Koike
Opt. Express 18(3) 3128-3136 (2010)

Low loss graded index polymer optical fiber with high stability under damp heat conditions

Kenji Makino, Takahiro Kado, Azusa Inoue, and Yasuhiro Koike
Opt. Express 20(12) 12893-12898 (2012)

Poly(styrene)-based graded-index plastic optical fiber for home networks

Yoshihisa Akimoto, Makoto Asai, Kotaro Koike, Kenji Makino, and Yasuhiro Koike
Opt. Lett. 37(11) 1853-1855 (2012)

High-bandwidth, graded-index polymer optical fiber for near-infrared use

Eisuke Nihei, Takaaki Ishigure, and Yasuhiro Koike
Appl. Opt. 35(36) 7085-7090 (1996)