Abstract

We have proposed the fabrication of small bend structures using trenches along both sides of the core, filled with low-refractive index material, in order to miniaturise silica planar lightwave circuits. The minimum bending radius of a silica waveguide was reduced from 2 mm to 200 $\mu{\hbox{m}}$ by filling the trenches with low-refractive index material. The local lateral relative refractive index difference ($\Delta$) was increased to 8.64%. We fabricated cascade S-shaped waveguides to estimate a bend loss of the proposed structure. Moreover, we applied those structures to arrayed-waveguide gratings (AWG)s. Both 8-channel, 100-GHz channel-spacing and 8-channel, 12.5-GHz channel-spacing AWGs were successfully fabricated. Compared with conventional AWGs, sizes of these devices were reduced by factors of about 2 and 4, respectively.

© 2009 IEEE

Small-area bends and beamsplitters for low-index-contrast waveguides

Lixia Li, Gregory P. Nordin, Jennifer M. English, and Jianhua Jiang
Opt. Express 11(3) 282-290 (2003)

Low-loss, flat-passband and athermal arrayedwaveguide grating multi/demultiplexer

Koichi Maru and Yukio Abe
Opt. Express 15(26) 18351-18356 (2007)

Air-trench splitters for ultra-compact ring resonators in low refractive index contrast waveguides

Nazli Rahmanian, Seunghyun Kim, Yongbin Lin, and Gregory P. Nordin
Opt. Express 16(1) 456-465 (2008)

Compact and low loss silicon-on-insulator rib waveguide 90° bend

Yusheng Qian, Seunghyun Kim, Jiguo Song, Gregory P. Nordin, and Jianhua Jiang
Opt. Express 14(13) 6020-6028 (2006)

Low-index-contrast waveguide bend based on truncated Eaton lens implemented by graded photonic crystals

S. Hadi Badri and M. M. Gilarlue
J. Opt. Soc. Am. B 36(5) 1288-1293 (2019)