OSA's Digital Library

Journal of the Optical Society of America

Journal of the Optical Society of America

  • Vol. 38, Iss. 4 — Apr. 1, 1948
  • pp: 300–303

Optics InfoBase > JOSA > Volume 38 > Issue 4 > Color Correction in Color Printing1

Color Correction in Color Printing1

ARTHUR C. HARDY and F. L. WURZBURG  »View Author Affiliations


JOSA, Vol. 38, Issue 4, pp. 300-303 (1948)
http://dx.doi.org/10.1364/JOSA.38.000300


View Full Text Article

Acrobat PDF (849 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

In a three-color print, the color of any area that is large in comparison with the size of the dots of the structured image can be regarded as an additive mixture of eight colors: the unprinted paper stock; the cyan, magenta, and yellow of the individual ink dots; the red, green, and blue that result when ink dots overlap in pairs; and the black that results when all three ink dots overlap. Since the extent of overlapping is determined by the sizes of the dots, the color of the additive mixture can be expressed by three equations. The straightforward attack on the problem of color reproduction is to solve these fundamental equations for the required dot sizes on the assumption that, in every area, the tristimulus values of the reproduction should be equal to those of the original. This has not been accomplished hitherto, because it involves solving three simultaneous equations of third degree, each containing eight terms. However, a relatively simple electronic equationsolving network has been constructed which solves these equations with ample precision in 0.001 second. By using this network in connection with a scanning machine of the type described in the preceding paper, full color correction is achieved. A corresponding set of equations can be written for the additive mixture produced in four-color printing, wherein the fourth color is black. Since the three equations now contain four unknowns, an additional condition must be imposed. From the standpoint of the printing requirements, it is desirable that at least one of the color dots be absent, or of some predetermined minimal size, in every region of the reproduction. An extension of the principles embodied in the electronic network mentioned above imposes this condition and yields a continuous solution to the three fourth-degree equations.

Citation
ARTHUR C. HARDY and F. L. WURZBURG, "Color Correction in Color Printing1," J. Opt. Soc. Am. 38, 300-303 (1948)
http://www.opticsinfobase.org/josa/abstract.cfm?URI=josa-38-4-300


Sort:  Author  |  Year  |  Journal  |  Reset

References

  1. Extension of paper presented at the October, 1946 meeting of the O.S.A.
  2. A. C. Hardy and F. L. Wurzburg, Jr., J. Opt. Soc. Am. 16, 295 (1948).
  3. Since there may be areas of the subject which are unlike in spectral composition but nevertheless appear to the eye to be of the same color, it is evident that the color-separation negatives must evaluate these areas in the same manner as does the human eye. In other words, the gammas of the three emulsions must be independent of wave-length within the spectral range transmitted by each filter and the spectral sensitivity curves of the three filter-emulsion combinations must correspond to the color-mixture curves of a normal observer for some set of basic stimuli. In the cycle of operations to be described below, these are the only requirements that need be imposed on the filter-emulsion combinations used in making the color-separation negatives. In other words, the spectral sensitivities of the filter-emulsion combinations are quite independent of the colors of the printing inks.
  4. Neugebauer, Zeits. f. tech. Physik 36, 22 (1937).
  5. American Standards Association, "Specification and description of color," Z44—1942.
  6. The assumption of standard colorimetric procedures is made in the interest of clarity of presentation, inasmuch as the meaning of tristimulus values in the I.C.I. system is now widely understood. By adopting this colorimetric system, however, freedom of selection of filter-emulsion combinations for the color-separation negatives is restricted to a single set; namely, a set whose spectral sensitivity curves correspond to the mixture curves for the basic stimuli of the I.C.I. system.
  7. Edward C. Dench took part in this development and is a co-author of the following paper which describes in greater detail the means devised for achieving color correction in both three- and four-color printing.
  8. A. C. Hardy and F. L. Wurzburg, Jr., "The theory of three-color reproduction," J. Opt. Soc. Am. 27, 227 (1937).

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited