OSA's Digital Library

Journal of the Optical Society of America

Journal of the Optical Society of America

  • Vol. 35, Iss. 4 — Apr. 1, 1945
  • pp: 289–292

Optics InfoBase > JOSA > Volume 35 > Issue 4 > Illuminating and Viewing Conditions for Spectrophotometry and Colorimetry

Illuminating and Viewing Conditions for Spectrophotometry and Colorimetry

ARTHUR C. HARDY  »View Author Affiliations


JOSA, Vol. 35, Issue 4, pp. 289-292 (1945)
http://dx.doi.org/10.1364/JOSA.35.000289


View Full Text Article

Acrobat PDF (480 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

No abstract available.

Citation
ARTHUR C. HARDY, "Illuminating and Viewing Conditions for Spectrophotometry and Colorimetry," J. Opt. Soc. Am. 35, 289-292 (1945)
http://www.opticsinfobase.org/josa/abstract.cfm?URI=josa-35-4-289


Sort:  Author  |  Journal  |  Reset

References

  1. The text of this resolution is as follows: "Dans la mésure colorimétrique des matériaux réfléchissants, excepté dans le cas où des circonstances particulières indiquent qu'il en doit être autrement, la lumière incidente doit faire un angle de 45° avec le normale et la direction d'observation doit être normale à la surface de l'échantillon."
  2. Arthur C. Hardy, J. Opt. Soc. Am. 25, 305 (1935).
  3. The reflectance of a matte surface produced by grinding is usually higher than the reflectance of an etched surface, because of the debris that is forced into the interstices of the surface during the grinding. This debris consists of abrasive mixed with a large quantity of powdered glass, which is always white regardless of the original color of the glass. Thus the reflectance of a ground surface of black glass is decreased from more than 10 percent to approximately 4 percent by subsequent etching.
  4. Final report of the O.S.A. Sub-Committee on the Spacing of the Munsell Colors, J. Opt. Soc. Am. 33, 385 (1943).
  5. Arthur C. Hardy, J. Opt. Soc. Am. and Rev. Sci. Inst. 18, 96 (1929).
  6. Of more serious consequence, when judged by present standards of accuracy, is the apparent variation in spectral reflectance produced by slight variations in the position of the sample. In the case of the 0°–45° instrument, merely removing a textile sample from the sample-holder and then replacing it for remeasurement usually changed the geometry significantly. This sensitivity to changes in geometry is at a maximum in the case of unidirectional light and vanishes when the light is diffuse.
  7. J. A. Leermakers, J. Chem. Phys. 5, 889 (1937).

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited